Purpose: to activate the scanning of the speedometer needles when the car is started. When you start your Golf, the speedometer needles move back and forth from minimum to maximum. Style Golf GTI/R. (Needle Sweep)

Information : If your meter is not compatible, the channel is inactive. Compatible with models after the end of 2009.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “10-Adaptation” then in the window that appears, click on the drop-down menu to choose a channel and select the “Staging” channel, if unavailable select the “indicator_celebration” channel:

5 – In the “New value” box, click on the drop-down menu and select “active”. Once this new value has been entered, click on “Save”:

L’article Eos (1F) Facelift – Needle check est apparu en premier sur VAG Coding.

Purpose: to activate the scanning of the speedometer needles when the car is started. When you start your Caddy, the speedometer hands move back and forth from minimum to maximum. (Needle Sweep)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “10-Adaptation” then in the window that appears, click on the drop-down menu to choose a channel and select the “Staging” channel, if unavailable select the “indicator_celebration” channel:

5 – In the “New value” box, click on the drop-down menu and select “active”. Once this new value has been entered, click on “Save”:

L’article Caddy (2K) Facelift – Checking the needles est apparu en premier sur VAG Coding.

Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“1”
Then check Bit“0”:“Gauge Test/Needle Sweep (Stading) active”.

L’article Fabia 4 (PJ) – Needle check est apparu en premier sur VAG Coding.

Purpose: activates needle sweep when the car is started. (Needle Sweep)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “10-Adaptation” then in the window that appears, click on the drop-down menu to choose a channel and select the “Staging” channel, if unavailable select the “indicator_celebration” channel:

5 – In the “New value” box, click on the drop-down menu and select “active”. Once this new value has been entered, click on “Save”:

L’article Transporter (T6) – Needle check est apparu en premier sur VAG Coding.

Purpose: activates needle sweep when the car is started. (Needle Sweep)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “10-Adaptation” then in the window that appears, click on the drop-down menu to choose a channel and select the “Staging” channel, if unavailable select the “indicator_celebration” channel:

5 – In the “New value” box, click on the drop-down menu and select “active”. Once this new value has been entered, click on “Save”:

L’article Alhambra (7N) – Check des aiguilles est apparu en premier sur VAG Coding.

Purpose: activates needle sweep when the car is started. (Needle Sweep)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “10-Adaptation” then in the window that appears, click on the drop-down menu to choose a channel and select the “Staging” channel, if unavailable select the “indicator_celebration” channel:

5 – In the “New value” box, click on the drop-down menu and select “active”. Once this new value has been entered, click on “Save”:

L’article Sharan (7N) – Needle check est apparu en premier sur VAG Coding.

Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“1”
Then check Bit“0”:“Gauge Test/Needle Sweep (Stading) active” or “Staging”.

L’article E-tron (GE) – Needle check est apparu en premier sur VAG Coding.

Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“1”
Then check Bit“0”:“Gauge Test/Needle Sweep (Stading) active”.

L’article Transporter (T6.1) – Needle check est apparu en premier sur VAG Coding.

Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“1”
Then check Bit“0”:“Gauge Test/Needle Sweep (Stading) active”.

L’article Taigo (CS) – Needle check est apparu en premier sur VAG Coding.

Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“1”
Then check Bit“0”:“Gauge Test/Needle Sweep (Stading) active”.

L’article Kamiq (NW) – Needle check est apparu en premier sur VAG Coding.