Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left lane, the vehicle starts to slow down.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.13 – Auto Dist. Reg “.

4 – Click on“Coding – 07” then“Long Coding Helper“.

5 – Uncheck the Bit: “overtaking_right_prevention“

OBDeleven: Select “overtaking_right_prevention”
Change from “activated” to “Deactivated”.

L’article Born (K11) – Deactivate right-hand overtaking prevention est apparu en premier sur VAG Coding.

Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left lane, the vehicle starts to slow down.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.13 – Auto Dist. Reg “.

4 – Click on“Coding – 07” then“Long Coding Helper“.

5 – Uncheck the Bit: “overtaking_right_prevention“

OBDeleven: Select “overtaking_right_prevention”
Change from “activated” to “Deactivated”.

L’article Enyaq (NY) – Disable right overtaking prevention est apparu en premier sur VAG Coding.

Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left lane, the vehicle starts to slow down.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.13 – Auto Dist. Reg “.

4 – Click on“Coding – 07” then“Long Coding Helper“.

5 – Uncheck the Bit: “overtaking_right_prevention“

OBDeleven: Select “overtaking_right_prevention”
Change from “activated” to “Deactivated”.

L’article ID.4 (E2) – Deactivate right-hand overtaking prevention est apparu en premier sur VAG Coding.

Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left lane, the vehicle starts to slow down.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.13 – Auto Dist. Reg “.

4 – Click on“Coding – 07” then“Long Coding Helper“.

5 – Uncheck the Bit: “overtaking_right_prevention“

OBDeleven: Select “overtaking_right_prevention”
Change from “activated” to “Deactivated”.

L’article ID.3 (E1) – Deactivate right-hand overtaking prevention est apparu en premier sur VAG Coding.

Purpose: to remember the function of the Audi Lane Assist. If you deactivate it, the Lane Assist will not automatically resume the next time you start up.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist“.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “IDE07596-Personalisierung Spurhalteassistent bei Kl. 15 ein “/”Personalization of lane dept. warning Cl. 15 on“

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“last setting ” and confirm.

L’article A5 (F5) – Activate Lane Assist memory function est apparu en premier sur VAG Coding.

Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left lane, the vehicle starts to slow down.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.13 – Auto Dist. Reg“.

4 – Click on“Coding – 07” then“Long Coding Helper”.

5 – Select byte“02”
Then uncheck Bit“5”: “overtaking_right_prevention”

OBDeleven: Select “overtaking_right_prevention”
Change from “activated” to “Deactivated”.

L’article Ibiza (6F) – Deactivate right-hand overtaking prevention est apparu en premier sur VAG Coding.

Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next time you start up. (For 8V1 phase 1 and 8V2 Facelift)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1 (For Camera A5 5Q0 / 3Q0) :

3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist“.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Personalization of lane dept. warning Cl. 15 on“

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“last setting ” and confirm.

Line 1 (For Camera A5 2Q0):

3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist“.

4 – Click on “Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“09”
Then check Bit 0-1“03 Configuration_for_lane_departure_warning_Kl15, Last_setting”.

L’article Ibiza (6F) – Activate Lane Assist memory function est apparu en premier sur VAG Coding.

Purpose: Adjusts the lane departure warning’s deactivation threshold for driver inactivity, the intensity of steering assistance, and the intensity of Audi Lane Assist steering wheel vibrations.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 (Steering assist intensity setting) :


3 – Click on ” Select ” then click on “Select”.A5 – Front camera” .

4 – Click on “Security Access – 16” then enter the code “20103”

5 – Click on “Adaptation – 10”.

6 – Select Channel : “Lane Departure Warning Intensity Steering Assistance” or

“Spurhalteassistent Intensität Lenkunterstützung

Adjust value accordingly

Setting range:

– low (Lane Assist switches off earlier depending on ambient conditions, as less/more sensitive steering interventions are carried out)
– medium (factory setting)
– high (Lane Assist switches off later depending on ambient conditions, as more/more intensive steering interventions are carried out)

Line 2 (Driver inactivity deactivation threshold setting) :


3 – Click on ” Select” then click on “Select”.A5 – Front camera” .

4 – Click on “Security Access – 16” then enter the code “20103”

5 – Click on “Adaptation – 10”.

6 – Select Channel :“Lane Departure Warning Deactivation Threshold Driver Inactivity” or “Spurhalteassistent Deaktivierungsschwelle Fahrerinaktivität”.

Adjust value accordingly

Setting range:

– early (deactivates Lane Assist within 7 seconds)
– medium (factory setting, deactivates Lane Assist within 7 to 10 seconds)
– late (deactivates Lane Assist within 11 to 15 seconds)

Line 3 (Steering vibration adjustment) :


3 – Click on ” Select ” then click on “Select”.A5 – Front camera” .

4 – Click on “Security Access – 16” then enter the code “20103”

5 – Click on “Adaptation – 10”.

6 – Choose Channel : “Directional stab. assist; intensity; steering wheel vibration “

Adjust value accordingly

Setting range:

– Low
– Medium
– High

L’article A8 (D5) – Audi Lane Assist settings est apparu en premier sur VAG Coding.

Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left lane, the vehicle starts to slow down.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.13 – Auto Dist. Reg“.

4 – Click on“Coding – 07” then“Long Coding Helper”.

5 – Select byte“02”
Then uncheck Bit“5”: “overtaking_right_prevention”

OBDeleven: Select “overtaking_right_prevention”
Change from “activated” to “Deactivated”.

L’article Kodiaq (NS) – Deactivate right-hand overtaking prevention est apparu en premier sur VAG Coding.

Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left lane, the vehicle starts to slow down.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.13 – Auto Dist. Reg“.

4 – Click on“Coding – 07” then“Long Coding Helper”.

5 – Select byte“02”
Then uncheck Bit“5”: “overtaking_right_prevention”

OBDeleven: Select “overtaking_right_prevention”
Change from “activated” to “Deactivated”.

L’article Superb (3V) Facelift – Deactivate right overtaking prevention est apparu en premier sur VAG Coding.