Purpose: to adjust seat heater temperature levels. Note that temperature values for individual steps must be set in ascending order.
Please check the number of seat heating levels your vehicle supports before changing. Not all vehicles support levels 1 to 6.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose :

Seat_Heating_Level_Adaptation:

• Seat_heating_stage_1_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_1_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_2_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_2_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_3_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_3_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_4_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_4_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_5_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_5_upper_threshold: 50,5°C (stage 3)
• Seat_heating_stage_6_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_6_upper_threshold: 50,5°C (stage 3)

OR

• “IDE06089-ENG263544-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_lower_threshold”
• “IDE06089-ENG263507-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_upper_threshold”
• “IDE06089-ENG263592-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_lower_threshold”
• “IDE06089-ENG263559-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_upper_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263536-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_lower_threshold”
• “IDE06089-ENG263549-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_upper_threshold”
• “IDE06089-ENG263566-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_lower_threshold”
• “IDE06089-ENG263597-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_upper_threshold”
• “IDE06089-ENG263562-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_lower_threshold”
• “IDE06089-ENG263524-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_upper_threshold”

6 – On this same page, there’s a second drop-down menu, but at the bottom
of the page.
Adjust the values as required. “Lower” is the activation temperature and “higher” is the deactivation temperature.

L’article Octavia 4 (NX) – Adjusting the temperature of heated seats est apparu en premier sur VAG Coding.

Purpose: to adjust seat heater temperature levels. Note that temperature values for individual steps must be set in ascending order.
Please check the number of seat heating levels your vehicle supports before changing. Not all vehicles support levels 1 to 6.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose :

Seat_Heating_Level_Adaptation:

• Seat_heating_stage_1_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_1_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_2_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_2_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_3_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_3_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_4_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_4_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_5_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_5_upper_threshold: 50,5°C (stage 3)
• Seat_heating_stage_6_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_6_upper_threshold: 50,5°C (stage 3)

OR

• “IDE06089-ENG263544-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_lower_threshold”
• “IDE06089-ENG263507-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_upper_threshold”
• “IDE06089-ENG263592-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_lower_threshold”
• “IDE06089-ENG263559-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_upper_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263536-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_lower_threshold”
• “IDE06089-ENG263549-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_upper_threshold”
• “IDE06089-ENG263566-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_lower_threshold”
• “IDE06089-ENG263597-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_upper_threshold”
• “IDE06089-ENG263562-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_lower_threshold”
• “IDE06089-ENG263524-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_upper_threshold”

6 – On this same page, there’s a second drop-down menu, but at the bottom
of the page.
Adjust the values as required. “Lower” is the activation temperature and “higher” is the deactivation temperature.

L’article Formentor (KM7) – Adjust temperature of heated seats est apparu en premier sur VAG Coding.

Purpose: to adjust seat heater temperature levels. Note that temperature values for individual steps must be set in ascending order.
Please check the number of seat heating levels your vehicle supports before changing. Not all vehicles support levels 1 to 6.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose :

Seat_Heating_Level_Adaptation:

• Seat_heating_stage_1_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_1_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_2_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_2_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_3_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_3_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_4_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_4_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_5_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_5_upper_threshold: 50,5°C (stage 3)
• Seat_heating_stage_6_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_6_upper_threshold: 50,5°C (stage 3)

OR

• “IDE06089-ENG263544-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_lower_threshold”
• “IDE06089-ENG263507-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_upper_threshold”
• “IDE06089-ENG263592-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_lower_threshold”
• “IDE06089-ENG263559-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_upper_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263536-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_lower_threshold”
• “IDE06089-ENG263549-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_upper_threshold”
• “IDE06089-ENG263566-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_lower_threshold”
• “IDE06089-ENG263597-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_upper_threshold”
• “IDE06089-ENG263562-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_lower_threshold”
• “IDE06089-ENG263524-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_upper_threshold”

6 – On this same page, there’s a second drop-down menu, but at the bottom
of the page.
Adjust the values as required. “Lower” is the activation temperature and “higher” is the deactivation temperature.

L’article Leon 4 (KL) – Adjust temperature of heated seats est apparu en premier sur VAG Coding.

Purpose: to adjust seat heater temperature levels. Note that temperature values for individual steps must be set in ascending order.
Please check the number of seat heating levels your vehicle supports before changing. Not all vehicles support levels 1 to 6.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose :

Seat_Heating_Level_Adaptation:

• Seat_heating_stage_1_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_1_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_2_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_2_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_3_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_3_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_4_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_4_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_5_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_5_upper_threshold: 50,5°C (stage 3)
• Seat_heating_stage_6_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_6_upper_threshold: 50,5°C (stage 3)

OR

• “IDE06089-ENG263544-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_lower_threshold”
• “IDE06089-ENG263507-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_upper_threshold”
• “IDE06089-ENG263592-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_lower_threshold”
• “IDE06089-ENG263559-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_upper_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263536-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_lower_threshold”
• “IDE06089-ENG263549-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_upper_threshold”
• “IDE06089-ENG263566-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_lower_threshold”
• “IDE06089-ENG263597-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_upper_threshold”
• “IDE06089-ENG263562-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_lower_threshold”
• “IDE06089-ENG263524-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_upper_threshold”

6 – On this same page, there’s a second drop-down menu, but at the bottom
of the page.
Adjust the values as required. “Lower” is the activation temperature and “higher” is the deactivation temperature.

L’article Golf 8 (5H) – Adjusting heated seat temperature est apparu en premier sur VAG Coding.

Purpose: to adjust seat heater temperature levels. Note that temperature values for individual steps must be set in ascending order.
Please check the number of seat heating levels your vehicle supports before changing. Not all vehicles support levels 1 to 6.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose :

Seat_Heating_Level_Adaptation:

• Seat_heating_stage_1_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_1_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_2_lower_threshold: 20,0°C (stage 1)
• Seat_heating_stage_2_upper_threshold: 20,5°C (stage 1)
• Seat_heating_stage_3_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_3_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_4_lower_threshold: 33,0°C (stage 2)
• Seat_heating_stage_4_upper_threshold: 33.5°C (stage 2)
• Seat_heating_stage_5_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_5_upper_threshold: 50,5°C (stage 3)
• Seat_heating_stage_6_lower_threshold: 50,0°C (stage 3)
• Seat_heating_stage_6_upper_threshold: 50,5°C (stage 3)

OR

• “IDE06089-ENG263544-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_lower_threshold”
• “IDE06089-ENG263507-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_1_upper_threshold”
• “IDE06089-ENG263592-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_lower_threshold”
• “IDE06089-ENG263559-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_2_upper_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263539-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_3_lower_threshold”
• “IDE06089-ENG263536-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_lower_threshold”
• “IDE06089-ENG263549-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_4_upper_threshold”
• “IDE06089-ENG263566-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_lower_threshold”
• “IDE06089-ENG263597-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_5_upper_threshold”
• “IDE06089-ENG263562-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_lower_threshold”
• “IDE06089-ENG263524-Zuordnung der Stromaufnahme für Sitzheizungsstufen-Seat_heating_stage_6_upper_threshold”

6 – On this same page, there’s a second drop-down menu, but at the bottom
of the page.
Adjust the values as required. “Lower” is the activation temperature and “higher” is the deactivation temperature.

L’article A3 (8Y) – Adjust temperature of heated seats est apparu en premier sur VAG Coding.

Purpose: to set the value in minutes of the heating reduction time for heated seats. As a general rule, Audi vehicles reduce the heat output of level 3 seat heating to level 2 after 10 minutes. It is also possible to activate the return from level 2 to level 1.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Time until seat heating reduction level 3 to level 2” /“Zeit bis Sitzheizleistungsrücknahme Stufe 3 auf Stufe 2” (also for 2 to 1).

6 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose the value in minutes (0 = function disabled) then validate.

L’article Q2 (GA) – Seat heater reduction time setting est apparu en premier sur VAG Coding.

Purpose: to set the value in minutes of the heating reduction time for heated seats. As a general rule, Audi vehicles reduce the heat output of level 3 seat heating to level 2 after 10 minutes. It is also possible to activate the return from level 2 to level 1.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Time until seat heating reduction level 3 to level 2” /“Zeit bis Sitzheizleistungsrücknahme Stufe 3 auf Stufe 2” (also for 2 to 1).

6 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose the value in minutes (0 = function disabled) then validate.

L’article TT (8S) – Seat heater reduction time setting est apparu en premier sur VAG Coding.

Purpose: Allows you to adjust the temperature of the steering wheel heater, you can increase or decrease the heating level of all or part of the seat by up to 5 degrees Celsius to obtain the optimum temperature setting for you.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“16 – Steering Column Electronics”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Steering wheel heating Temperature 1” or“Chauffage du volant température1”.

Then temperatures 2 and 3 (Heated flywheel power)

6 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select the range of values: -5 to +5 (degrees Celsius) relative to the base temperature, then confirm.

L’article Touareg 3 (CR) – Heated steering wheel settings est apparu en premier sur VAG Coding.

Purpose: Allows you to adjust the temperature of the steering wheel heater, you can increase or decrease the heating level of all or part of the seat by up to 5 degrees Celsius to obtain the optimum temperature setting for you.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“16 – Steering Column Electronics”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Steering wheel heating Temperature 1” or“Chauffage du volant température1”.

Then temperatures 2 and 3 (Heated flywheel power)

6 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select the range of values: -5 to +5 (degrees Celsius) relative to the base temperature, then confirm.

L’article Q8 (4M) – Heated steering wheel settings est apparu en premier sur VAG Coding.

Purpose: Allows you to adjust the temperature of the steering wheel heater. You can increase or decrease the heating level of all or part of the seat by up to 5 degrees Celsius to obtain the optimum temperature setting for you.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“16 – Steering Column Electronics”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Steering wheel heating Temperature 1” or“Chauffage du volant température1”.

Then temperatures 2 and 3 (Heated flywheel power)

6 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select the range of values: -5 to +5 (degrees Celsius) relative to the base temperature, then confirm.

L’article Q7 (4M) – Heated steering wheel settings est apparu en premier sur VAG Coding.