Purpose: automatically retracts the electric driver’s seat when the ignition is switched off and the door is opened (access aid).

This option can only be activated with a VCDS with experimental coding for the lo coding wizard.ng! (MIB2 compatible)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.36 – Seat Mem. Drvr“.

4 – Click on“Coding 07”.

5 – Select “Long coding wizard”:

Byte 3, Set bit 1 – “Easy_Entry_front,0=nict aktiv/1=aktiv

For passenger seat with electric option: Byte 6, Set bit 3

Then Byte 9 Set bit 6 – “automatic_func_key_memory_over_MMI, 0=nict aktiv/1=aktiv”.

Line 2:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 3:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10_msg_bus”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Comfort data bus” and confirm.

Line 4:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 5:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration_over_threshold_high”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Arteon (3H) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: automatically retracts the electric driver’s seat when the ignition is switched off and the door is opened (access aid).

This option can only be activated with a VCDS with experimental coding for the lo coding wizard.ng! (MIB2 compatible)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.36 – Seat Mem. Drvr“.

4 – Click on“Coding 07”.

5 – Select “Long coding wizard”:

Byte 3, Set bit 1 – “Easy_Entry_front,0=nict aktiv/1=aktiv

For passenger seat with electric option: Byte 6, Set bit 3

Then Byte 9 Set bit 6 – “automatic_func_key_memory_over_MMI, 0=nict aktiv/1=aktiv”.

Line 2:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 3:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10_msg_bus”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Comfort data bus” and confirm.

Line 4:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 5:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration_over_threshold_high”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Ateca (5F) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: automatically retracts the electric driver’s seat when the ignition is switched off and the door is opened (access aid).

This option can only be activated with a VCDS with experimental coding for the lo coding wizard.ng! (MIB2 compatible)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.36 – Seat Mem. Drvr“.

4 – Click on“Coding 07”.

5 – Select “Long coding wizard”:

Byte 3, Set bit 1 – “Easy_Entry_front,0=nict aktiv/1=aktiv

Then Byte 9 Set bit 6 – “automatic_func_key_memory_over_MMI, 0=nict aktiv/1=aktiv”.

Line 2:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 3:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10_msg_bus”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Comfort data bus” and confirm.

Line 4:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 5:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration_over_threshold_high”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Leon (5F) Facelift – Easy Entry est apparu en premier sur VAG Coding.

Purpose: automatically retracts the electric driver’s seat when the ignition is switched off and the door is opened (access aid).

This option can only be activated with a VCDS with experimental coding for the lo coding wizard.ng! (MIB2 compatible)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.36 – Seat Mem. Drvr“.

4 – Click on“Coding 07”.

5 – Select “Long coding wizard”:

Byte 3, Set bit 1 – “Easy_Entry_front,0=nict aktiv/1=aktiv

For passenger seat with electric option: Byte 6, Set bit 3

Then Byte 9 Set bit 6 – “automatic_func_key_memory_over_MMI, 0=nict aktiv/1=aktiv”.

Line 2:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 3:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10_msg_bus”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Comfort data bus” and confirm.

Line 4:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 5:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration_over_threshold_high”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Karoq (NU) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: automatically moves back the driver’s seat when the ignition is switched off and the door is opened (access aid).

This option can only be activated with a VCDS with experimental coding for the lo coding wizard.ng! (MIB2 compatible)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.36 – Seat Mem. Drvr“.

4 – Click on“Coding 07”.

5 – Select “Long coding wizard”:

Byte 3, Set bit 1 – “Easy_Entry_front,0=nict aktiv/1=aktiv

For passenger seat with electric option: Byte 6, Set bit 3

Then Byte 9 Set bit 6 – “automatic_func_key_memory_over_MMI, 0=nict aktiv/1=aktiv”.

Line 2:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 3:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2 – driver_seat_0x10_msg_bus”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Comfort data bus” and confirm.

Line 4:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 5:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2 – menu_display_seat_configuration_over_threshold_high”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Kodiaq (NS) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: to activate the “Easy Entry” function for the driver’s seat. By default, vehicles equipped with the electric steering column option automatically lock the driver’s seat when the vehicle is switched off and the driver’s door is open, to allow easy exit from the vehicle. In addition, when the car is unlocked and the driver’s door opened, the driver’s seat moves back to allow easy entry, and when the car is started, the seat moves forward to its last position. If you have a convenient/advanced key and driver memory seats, when you start the car, the seat moves to the recall memory stored on the key used to unlock the car (linked to button 1 or 2 of the driver seat memory buttons in the door trim). This modification enables this functionality when the electric steering column is not installed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Central Electrics”.

4 – Click on “Coding 07”.

5 – Select Byte 14:

Check Bit 2 “easy_entry_steering_column_via_mmi_configurable,active”.

Line 2:

3 – Click on “Select”, then click on “36 – Seat Memory Driver”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Line 2:

3 – Click on “Select”, then click on “06 – Seat Memory Passenger”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Restart the MMI!

You should see the Easy Entry option under “Vehicle settings / Seats / Driver’s seat”. Make sure this option is checked.

L’article Touareg 3 (CR) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: to activate the “Easy Entry” function for the driver’s seat. By default, vehicles equipped with the electric steering column option automatically lock the driver’s seat when the vehicle is switched off and the driver’s door is open, to allow easy exit from the vehicle. In addition, when the car is unlocked and the driver’s door opened, the driver’s seat moves back to allow easy entry, and when the car is started, the seat moves forward to its last position. If you have a convenient/advanced key and driver memory seats, when you start the car, the seat moves to the recall memory stored on the key used to unlock the car (linked to button 1 or 2 of the driver seat memory buttons in the door trim). This modification enables this functionality when the electric steering column is not installed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Central Electrics”.

4 – Click on “Coding 07”.

5 – Select Byte 14:

Check Bit 2 “easy_entry_steering_column_via_mmi_configurable,active”.

Line 2:

3 – Click on “Select”, then click on “36 – Seat Memory Driver”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Line 2:

3 – Click on “Select”, then click on “06 – Seat Memory Passenger”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Restart the MMI!

You should see the Easy Entry option under “Vehicle settings / Seats / Driver’s seat”. Make sure this option is checked.

L’article Q5 (FY) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: to activate the “Easy Entry” function for the driver’s seat. By default, vehicles equipped with the electric steering column option automatically lock the driver’s seat when the vehicle is switched off and the driver’s door is open, to allow easy exit from the vehicle. In addition, when the car is unlocked and the driver’s door opened, the driver’s seat moves back to allow easy entry, and when the car is started, the seat moves forward to its last position. If you have a convenient/advanced key and driver memory seats, when you start the car, the seat moves to the recall memory stored on the key used to unlock the car (linked to button 1 or 2 of the driver seat memory buttons in the door trim). This modification enables this functionality when the electric steering column is not installed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Central Electrics”.

4 – Click on “Coding 07”.

5 – Select Byte 14:

Check Bit 2 “easy_entry_steering_column_via_mmi_configurable,active”.

Line 2:

3 – Click on “Select”, then click on “36 – Seat Memory Driver”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Line 2:

3 – Click on “Select”, then click on “06 – Seat Memory Passenger”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Restart the MMI!

You should see the Easy Entry option under “Vehicle settings / Seats / Driver’s seat”. Make sure this option is checked.

L’article Q8 (4M) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: to activate the “Easy Entry” function for the driver’s seat. By default, vehicles equipped with the electric steering column option automatically lock the driver’s seat when the vehicle is switched off and the driver’s door is open, to allow easy exit from the vehicle. In addition, when the car is unlocked and the driver’s door opened, the driver’s seat moves back to allow easy entry, and when the car is started, the seat moves forward to its last position. If you have a convenient/advanced key and driver memory seats, when you start the car, the seat moves to the recall memory stored on the key used to unlock the car (linked to button 1 or 2 of the driver seat memory buttons in the door trim). This modification enables this functionality when the electric steering column is not installed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Central Electrics”.

4 – Click on “Coding 07”.

5 – Select Byte 14:

Check Bit 2 “easy_entry_steering_column_via_mmi_configurable,active”.

Line 2:

3 – Click on “Select”, then click on “36 – Seat Memory Driver”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Line 2:

3 – Click on “Select”, then click on “06 – Seat Memory Passenger”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Restart the MMI!

You should see the Easy Entry option under “Vehicle settings / Seats / Driver’s seat”. Make sure this option is checked.

L’article Q7 (4M) – Easy Entry est apparu en premier sur VAG Coding.

Purpose: to activate the “Easy Entry” function for the driver’s seat. By default, vehicles equipped with the electric steering column option automatically lock the driver’s seat when the vehicle is switched off and the driver’s door is open, to allow easy exit from the vehicle. In addition, when the car is unlocked and the driver’s door opened, the driver’s seat moves back to allow easy entry, and when the car is started, the seat moves forward to its last position. If you have a convenient/advanced key and driver memory seats, when you start the car, the seat moves to the recall memory stored on the key used to unlock the car (linked to button 1 or 2 of the driver seat memory buttons in the door trim). This modification enables this functionality when the electric steering column is not installed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Central Electrics”.

4 – Click on “Coding 07”.

5 – Select Byte 14:

Check Bit 2 “easy_entry_steering_column_via_mmi_configurable,active”.

Line 2:

3 – Click on “Select”, then click on “36 – Seat Memory Driver”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Line 2:

3 – Click on “Select”, then click on “06 – Seat Memory Passenger”.

4 – Click on “Coding 07”.

5 – Select Byte 03:

Check Bit 6 “Easy_Entry_front,0=not active / 1=active”.

Restart the MMI!

You should see the Easy Entry option under “Vehicle settings / Seats / Driver’s seat”. Make sure this option is checked.

L’article A8 (D5) – Easy Entry est apparu en premier sur VAG Coding.