Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”.

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

3 – Click on “Select” then click on “09 – Cent. Elect.”.

4 – Click on “Security Access – 16” then enter the code “31347”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Access control – Autounlock NAR”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose “active”, then confirm.

L’article Tarraco (KN) – Automatic door unlocking with DSG in “P” position est apparu en premier sur VAG Coding.

Purpose: deactivates the beep when reverse gear is engaged in DSG position R.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Acoustics_driving_position_R” / “Acoustics: Rapport R”.

6 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Not Active” and confirm.

L’article Octavia 4 (NX) – Disable DSG reverse beep est apparu en premier sur VAG Coding.

Purpose: deactivates the beep when reverse gear is engaged in DSG position R.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Acoustics_driving_position_R” / “Acoustics: Rapport R”.

6 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Not Active” and confirm.

L’article Formentor (KM7) – Deactivate DSG reverse beeper est apparu en premier sur VAG Coding.

Purpose: deactivates the beep when reverse gear is engaged in DSG position R.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Acoustics_driving_position_R” / “Acoustics: Rapport R”.

6 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Not Active” and confirm.

L’article Leon 4 (KL) – Deactivate DSG reverse beep est apparu en premier sur VAG Coding.

Purpose: deactivates the beep when reverse gear is engaged in DSG position R.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Acoustics_driving_position_R” / “Acoustics: Rapport R”.

6 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Not Active” and confirm.

L’article A3 (8Y) – Deactivate DSG reverse beeper est apparu en premier sur VAG Coding.

Purpose: deactivates the beep when reverse gear is engaged in DSG position R.

SFD: no

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Acoustics_driving_position_R” / “Acoustics: Rapport R”.

6 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Not Active” and confirm.

L’article Golf 8 (5H) – Deactivate DSG reverse beep est apparu en premier sur VAG Coding.

Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”.

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

3 – Click on “Select” then click on “09 – Cent. Elect.”.

4 – Click on “Security Access – 16” then enter the code “31347”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Access control – Autounlock NAR”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose “active”, then confirm.

L’article Transporter (T6.1) – Automatic door unlocking with DSG in “P” position est apparu en premier sur VAG Coding.

Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”.

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

3 – Click on “Select” then click on “09 – Cent. Elect.”.

4 – Click on “Security Access – 16” then enter the code “31347”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Access control – Autounlock NAR”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose “active”, then confirm.

L’article Ibiza (6F) – Automatic door unlocking with DSG in “P” position est apparu en premier sur VAG Coding.

Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”.

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

3 – Click on “Select” then click on “09 – Cent. Elect.”.

4 – Click on “Security Access – 16” then enter the code “31347”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Access control – Autounlock NAR”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose “active”, then confirm.

L’article Fabia (NJ) – Automatic door unlocking with DSG in “P” position est apparu en premier sur VAG Coding.

Understanding and Checking the Launch Control Number on Audi, Volkswagen, Seat and Skoda Cars

Contents:

1 – Introduction to Launch Control
2 – How Launch Control works on Audi and Volkswagen
3 – The Launch Control Program: Conditions and Use
4 – The Impact of Launch Control on Vehicle Durability
5 – Why Check the Number of Launch Controls before a Purchase?
6 – Tutorial: How to Check the Number of Launch Controls with VCDS
7 – Conclusion

-> VCDS: Check mileage
-> VCDS: Reset / Reset DSG

1 – Introduction to Launch Control

Launch Control is an innovative feature found on Audi and Volkswagen vehicles, enabling lightning-fast starts by optimizing acceleration right from the start. It’s the perfect tool for drivers with a passion for performance.

2 – Launch Control operation on Audi and Volkswagen

On vehicles equipped with automatic transmissions such as DSG, Launch Control automatically manages traction and acceleration for powerful, controlled starts from standstill. It adjusts engine speed and optimizes the transmission to maximize performance from the very first touch of the gas pedal.

3 – The Launch Control program: Terms and conditions of use

The Launch Control program provides maximum acceleration under specific conditions:

• The motor must be at operating temperature.
• Wheels and steering wheel must be in straight-ahead position.
• The start/stop system must be deactivated.
• The start-up assistant must be deactivated.
• The motor must be running, and the ESC-OFF key must be pressed briefly once.
• Select DSG or Tiptronic “S” gear, or Sport driving mode (VW / Seat / Skoda) or Dynamic mode must be selected via Audi Drive Select.
• Press and hold the brake pedal firmly for one second.
• Press and hold the gas pedal all the way down.
• Take your foot off the brake for an immediate start.

After using the Launch Control program, the gearbox temperature may rise significantly, making the program unavailable for several minutes. Once the gearbox has cooled down, the function becomes available again. It’s important to note that frequent use of Launch Control places a heavy load on drivetrain parts, resulting in excessive wear.

4 – The Impact of Launch Control on Vehicle Durability

Intensive use of Launch Control, although effective, can accelerate wear and tear on vehicle components such as the gearbox and tires. This can also affect the car’s overall lifespan, making it essential to check the number of times this function has been used, especially when buying a used vehicle.

5 – Why check the number of Launch Controls before buying?

Knowing the number of times Launch Control has been activated can give you an indication of how the vehicle has been used. Intensive use may reveal that the car has been driven aggressively, which could influence your purchasing decision. It is therefore advisable to check this data before concluding a sale.

6 – Tutorial: How to control the number of Launch Controls with VCDS

For vehicles on the MQB platform, such as the Golf 7,Audi A3 8V or Seat Leon 5F, you can easily check the number of Launch Controls performed using VCDS. Here’s how:

1. Open VCDS and connect it to the vehicle’s OBD-II interface.
2. Access module 02 – Auto Box in the main menu.
3. Select the ” My advanced values “to access live data.
4. Look for the “Launch Control number” block.
5. Compare the number found with the vehicle’s mileage and age to assess potential wear.

Information: Some “DQ” auto boxes don’t display the launch control number, so the measurement can’t be searched.

7 – Conclusion

Launch Control is an impressive feature for speed enthusiasts, but its use must be controlled to avoid premature wear and tear on the vehicle. Before buying an Audi, Volkswagen or any other vehicle equipped with this technology, be sure to check how often Launch Control has been used. And don’t neglect to check the vehicle’s history and mileage for a complete and reliable assessment of the car you’re considering.

L’article VCDS: Check the number of Launch Controls est apparu en premier sur VAG Coding.