Purpose: to deactivate the daytime running lights (DRL) using the handbrake.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.19- Gateway“.

4 – Unlock SFD protection.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Daytime running lights-Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Born (K11) – Daytime running light deactivation (DRL) with handbrake on est apparu en premier sur VAG Coding.

Purpose: to deactivate the daytime running lights (DRL) using the handbrake.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.19- Gateway“.

4 – Unlock SFD protection.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Daytime running lights-Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Enyaq (NY) – Daytime running light deactivation (DRL) with handbrake est apparu en premier sur VAG Coding.

Purpose: to deactivate the daytime running lights (DRL) using the handbrake.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.19- Gateway“.

4 – Unlock SFD protection.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Daytime running lights-Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article ID.4 (E2) – Daytime running light deactivation (DRL) with handbrake on est apparu en premier sur VAG Coding.

Purpose: to deactivate the daytime running lights (DRL) using the handbrake.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.19- Gateway“.

4 – Unlock SFD protection.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Daytime running lights-Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article ID.3 (E1) – Daytime running light deactivation (DRL) with handbrake on est apparu en premier sur VAG Coding.

Purpose: Allows fog lamps to be used as daytime running lights.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

6 – Byte 0 :
Bit 4: Check “Daytime Running Lights (North America)”.

7 – Byte 17:
Bit 4: Check “Daytime Running Light with dimmed Low Beam” (or “Daytime Running Light via Fog Lights” depending on your VCDS version).

8- Fog lamp power adjustment (from 1% to 99%)

Byte 20:
Modify the value of the Dec box

L’article Passat (B6) – Activate daytime running lights with fog lamps (DRL) est apparu en premier sur VAG Coding.

Purpose: to activate daytime running lights (DRL) with fog lamps.


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB45-Lichtfunktion B 12”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB5-Lichtfunktion B 13”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

L’article Tarraco (KN) – Activate fog lamps with daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: to activate daytime running lights (DRL) with fog lamps.


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB45-Lichtfunktion B 12”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB5-Lichtfunktion B 13”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

L’article Ateca (5F) – Activate fog lamps as daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: to activate daytime running lights (DRL) with fog lamps.


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB45-Lichtfunktion B 12”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB5-Lichtfunktion B 13”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

INFO: Impossible to code with a Golf 7R or GTE (no AB) or a Golf without AB!

L’article Tiguan 2 (AD1) – Activate fog lamps as daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: to activate daytime running lights (DRL) with fog lamps.


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB40-Lichtfunktion B 12”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB3-Lichtfunktion B 13”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

L’article Polo 6 (AW1) – Activate fog lamps as daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: to activate daytime running lights (DRL) with fog lamps.


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB40-Lichtfunktion B 12”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB3-Lichtfunktion B 13”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Daytime running lights” and confirm.

L’article Ibiza (6F) – Activate fog lamps as daytime running lights (DRL) est apparu en premier sur VAG Coding.