Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Off ” and confirm.

L’article Passat (B8) – Deactivation of Corner Lights when reversing est apparu en premier sur VAG Coding.

Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Off ” and confirm.

L’article T-Roc (A1) – Deactivation of Corner Lights when reversing est apparu en premier sur VAG Coding.

Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Off” and confirm.

L’article Superb (3V) – Deactivation of Corner Lights when reversing est apparu en premier sur VAG Coding.

Purpose: to activate the Corner Light (AFS) when reversing.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this menu, select “Bilateral” / “both sides”, then confirm.

L’article Q2 (GA) – Switch on Corner Lights in reverse est apparu en premier sur VAG Coding.

Purpose: to activate the Corner Lights (AFS) in reverse.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this menu, select “Bilateral” / “both sides”, then confirm.

L’article Karoq (NU) – Corner Lights in reverse est apparu en premier sur VAG Coding.

Purpose: When the cornering lights are activated, the fog lights come on on the side where the steering wheel is turned at speeds under 50 km/h. This function is also known as cornering. Once this function has been activated on your Touran, the fog lamp on the side of the bend you’re turning into lights up! Super handy for small roads and roundabouts.

Modification only possible for vehicles with a 30 Byte power plant.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 23:
Bit 2: Check “Internal Turn Light Control Algorithm active”.
Bit 3-4: Select “08 Turn Lights via fog lights” from the drop-down list

L’article Touran (1T) – Corner Lights activation est apparu en premier sur VAG Coding.

Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Off ” and confirm.

L’article Touran (2T) – Deactivation of Corner Lights when reversing est apparu en premier sur VAG Coding.

Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Off ” and confirm.

L’article Tiguan 2 (AD1) – Corner Lights deactivated when reversing est apparu en premier sur VAG Coding.

Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Off” and confirm.

L’article Octavia 3 (5E) – Corner Lights deactivated when reversing est apparu en premier sur VAG Coding.

Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “static directional light-bei Rueckwaertsfahrt” / “static AFS light-bei Rueckwaertsfahrt”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select “Off ” and confirm.

L’article Leon (5F) – Deactivation of Corner Lights when reversing est apparu en premier sur VAG Coding.