Purpose: to adjust the sensitivity of the highway lights.

SFD: yes

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or your OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1 (highway light activation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_on”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this, choose the value for the headlight activation speed, then validate. (default: 140 km/h)

Line 2 (highway light deactivation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation speed, then validate. (default: 65 km/h)

Line 3 (highway light deactivation times):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_t_autobahn_delay_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation delay, then confirm. (default: 120 s)

L’article Born (K11) – Highway light sensitivity settings est apparu en premier sur VAG Coding.

Purpose: to adjust the sensitivity of the highway lights.

SFD: yes

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or your OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1 (highway light activation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_on”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this, choose the value for the headlight activation speed, then validate. (default: 140 km/h)

Line 2 (highway light deactivation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation speed, then validate. (default: 65 km/h)

Line 3 (highway light deactivation times):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_t_autobahn_delay_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation delay, then confirm. (default: 120 s)

L’article Enyaq (NY) – Highway light sensitivity settings est apparu en premier sur VAG Coding.

Purpose: to adjust the sensitivity of the highway lights.

SFD: yes

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or your OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1 (highway light activation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_on”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this, choose the value for the headlight activation speed, then validate. (default: 140 km/h)

Line 2 (highway light deactivation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation speed, then validate. (default: 65 km/h)

Line 3 (highway light deactivation times):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_t_autobahn_delay_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation delay, then confirm. (default: 120 s)

L’article ID.4 (E2) – Highway light sensitivity settings est apparu en premier sur VAG Coding.

Purpose: to adjust the sensitivity of the highway lights.

SFD: yes

Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or your OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1 (highway light activation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_on”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this, choose the value for the headlight activation speed, then validate. (default: 140 km/h)

Line 2 (highway light deactivation speed):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation speed, then validate. (default: 65 km/h)

Line 3 (highway light deactivation times):

3 – Click on “Select”, then click on “09 – Cent. Elect.”.

4 – Unlock SFD protection.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_t_autobahn_delay_off”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation delay, then confirm. (default: 120 s)

L’article ID.3 (E1) – Highway light sensitivity settings est apparu en premier sur VAG Coding.

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h.

(The lights will automatically go out if the vehicle is travelling at less than 60 km/h)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long Coding Helper”:

Byte 0, Bit 0: Check “Highway Light Function active above (140kph/90mph)”.

L’article Ibiza (6P) – Automatic headlamp activation from 140 km/h est apparu en premier sur VAG Coding.

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h.

(The lights will automatically go out if the vehicle is travelling at less than 60 km/h)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long Coding Helper”:

Byte 0, Bit 0: Check “Highway Light Function active above (140kph/90mph)”.

L’article Eos (1F) Facelift – Automatic headlamps from 140 km/h est apparu en premier sur VAG Coding.

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h.

(The lights will automatically go out if the vehicle is travelling at less than 60 km/h)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long Coding Helper”:

Byte 0 Bit 0: Check “Highway Light Function active above (140kph/90mph)”.

L’article Eos (1F) – Automatic headlight activation from 140 km/h est apparu en premier sur VAG Coding.

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h.

(The lights will automatically go out if the vehicle is travelling at less than 60 km/h)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long Coding Helper”:

Byte 0, Bit 0: Check “Highway Light Function active above (140kph/90mph)”.

L’article Touareg (7P) – Automatic headlamp activation from 140 km/h est apparu en premier sur VAG Coding.

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h.

(The lights will automatically go out if the vehicle is travelling at less than 60 km/h)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long Coding Helper”:

Byte 0 Bit 0: Check “Highway Light Function active above (140kph/90mph)”.

L’article Octavia 2 (1Z) Facelift – Automatic headlights from 140 km/h est apparu en premier sur VAG Coding.

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h.

(The lights will automatically go out if the vehicle is travelling at less than 60 km/h)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long Coding Helper”:

Byte 0 Bit 0: Check “Highway Light Function active above (140kph/90mph)”.

L’article Caddy (2K) Facelift – Automatic headlamps from 140 km/h est apparu en premier sur VAG Coding.