Purpose: to disable the AM radio frequency on the display (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable

L’article Toledo (NH) – Deactivate AM frequency est apparu en premier sur VAG Coding.

Purpose: to disable the AM radio frequency on the display (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable

L’article Ibiza (6P) – Disable AM frequency est apparu en premier sur VAG Coding.

Purpose: Allows you to disable the AM radio frequency on the Discover PQ (the AM radio frequency is rarely used, unlike the FM radio frequency).
For Beetle Facelift after 2015 (Radio screen like Golf 7).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable

L’article Beetle (5C) – Disable AM frequency on Discover est apparu en premier sur VAG Coding.

Purpose: to disable the AM radio frequency on the Discover PQ (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable

L’article Transporter (T6) – Disable AM frequency on Discover est apparu en premier sur VAG Coding.

Purpose: to deactivate the AM radio frequency on the Discover PQ (the AM radio frequency is rarely used, unlike the FM radio frequency).
For Amarok Facelift after 2015 (Radio display like Golf 7).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable

L’article Amarok (2H) Facelift – Disable AM frequency on Discover est apparu en premier sur VAG Coding.

Purpose: to deactivate the AM radio frequency on the MMI (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable”.

L’article Q3 (F3) – Disable AM frequency on the MMI est apparu en premier sur VAG Coding.

Purpose: to deactivate the AM radio frequency on the MMI (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable”.

L’article A1 (GB) – Disable AM frequency on MMI est apparu en premier sur VAG Coding.

Purpose: to deactivate the AM radio frequency on the Discover PQ (the AM radio frequency is rarely used, unlike the FM radio frequency).
For Facelift models (Mib2 screen like Golf 7).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable

L’article Sharan (7N) – Disable AM frequency on Discover est apparu en premier sur VAG Coding.

Purpose: to deactivate the AM radio frequency on the MMI (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable”.

L’article Touareg 3 (CR) – Disable AM frequency on MMI est apparu en premier sur VAG Coding.

Purpose: to deactivate the AM radio frequency on the MMI (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable”.

L’article Q8 (4M) – Disable AM frequency on the MMI est apparu en premier sur VAG Coding.