Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the door if it is opened using the interior handles.

Warning! There are 11 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Coding – 07”. then click on“Long Coding Helper”.

6 – Select byte“12”
Then check that Bit“0”“Anti-theft-System installed/Active” and Bit“6”“Start Anti-theft Alarm delay with Mechanical” are checked.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – uberwachung Innenentriegelungshebel”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 9:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“keine verzoegerung” and confirm.

Line 10:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Dynamic flashing modes – DWA_Alarm_Blinken”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 11:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Dynamic flashing modes – Taxi alarm flashing.”

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

L’article Ibiza (6P) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the door if it is opened. (after 2015)

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article TT (8S) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article Q3 (F3) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article A1 (GB) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article Q2 (GA) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article Arteon (3H) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the door if it is opened using the interior handles.

Warning! There are 11 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Coding – 07”. then click on“Long Coding Helper”.

6 – Select byte“12”
Then check that Bit“0”“Anti-theft-System installed/Active” and Bit“6”“Start Anti-theft Alarm delay with Mechanical” are checked.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – uberwachung Innenentriegelungshebel”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 9:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“keine verzoegerung” and confirm.

Line 10:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Dynamic flashing modes – DWA_Alarm_Blinken”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

Line 11:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Dynamic flashing modes – Taxi alarm flashing.”

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“not active” and confirm.

L’article Polo 5 (6C) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article Ibiza (6F) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article Arona (KJ) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the door if it is opened using the interior handles.

Warning! There are 8 lines of coding to do here.

For vehicles without original alarm!

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.

L’article Tarraco (KN) – Activate intruder alarm with horn est apparu en premier sur VAG Coding.