Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Ibiza (6P) – Increase throttle sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Fabia (NJ) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Formentor (KM7) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Octavia 4 (NX) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Leon 4 (KL) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article A3 (8Y) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Golf 8 (5H) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with S Tronic, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article TT (8S) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Fabia 4 (PJ) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with S Tronic, more significant than with manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.

L’article Q3 (F3) – Increase gas pedal sensitivity est apparu en premier sur VAG Coding.