List of coding and modification options with OBDeleven OBD11 ONE-CLICK APPS for Volkswagen Up! (1S)
-> Buy your OBDeleven with VAG Custom

VW UP! 1S (AA) (2011-2023)

2011-2016 :

• Disable traction control
• Inspection service reset
• Oil service reset
• Automatic locking/unlocking
• CH/LH lights
• Comfort turn signals
• Corner lights
• Turn signal corner lights
• RCD 215 driving-school mode
• Daytime running lights on/off
• DRL in MFD+
• Emergency brake lights
• Hill-start assist settings
• Remote trunk opening/unlocking
• Seat belt warning
• Selective central locking
• Teardrop wipe
• Inspection service distance
• Inspection service interval
• Multimedia security disclaimer
• Oil change service distance
• Oil change service interval

2016-2023 :

• Disable traction control
• Inspection service reset
• Oil service reset
• Automatic locking/unlocking
• Brake pad wear indicator
• CH/LH lights
• CH/LH light variant
• Comfort function for power windows via remote control
• Comfort turn signals
• Turn signal lights
• DRL activation/deactivation
• DRL in MFD+
• Emergency brake lights
• Motor fan test
• ESC OFF temporary
• EV engine noise generator volume
• Front wiper operating mode/position
• LED license plate lamps
• Acoustic confirmation of locking/unlocking
• Seat belt warning
• Selective central locking
• Soundaktor
• Teardrop wipe
• Tire pressure warning
• Visual confirmation for comfort operation
• Washer fluid sensor
• Brake lights with ignition
• Central locking with IGN
• Air conditioning temperature memory
• Comfort function for sunroof
• Time to return home
• Correction of consumption display
• Bending lights
• Bending lights with reverse
• DRL function with flashing light
• DRL OFF with Handbrake
• Engine oil type
• Fog lamps with high beam
• Hill-start assist
• Turn signals with comfort windows
• Inspection service distance
• Inspection service interval
• Instrument cluster language
• Interior lighting via rear cover
• Lane assistant setting memory
• Departure time
• Mirror heating with rear window
• Multimedia restart
• Multimedia security notice
• Oil change service distance
• Oil change service interval
• Parking light
• Fuel quantity in instrument panel
• Remote key coupling
• Scandinavian daytime running lights
• Disabling the Start/Stop system
• Straight-line braking stabilization

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps UP! list (1S) est apparu en premier sur VAG Coding.

Purpose: to activate the rear lights as daytime running lights (Scandinavian DRL).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect.” .

4 – Click on “Coding – 07”.

5 – Select Byte 12 :

Bit 0: Check “Daytime running lights via Tails Lights active”.

L’article Up! (1S) – Rear daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: Allows you to add a Driving School mode view to the RCD 215 that displays turn signals, speed, etc. (also ideal for accompanied driving)


Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Channel 2”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“1” and confirm.

To activate, press the key combination “Menu -> On”.

L’article Up! (1S) – Activate Driving School mode (RCD 215) est apparu en premier sur VAG Coding.

Purpose: to activate the daytime running lights (DRL).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 23:
Bit 6 : Check Function “Daytime Running Light (DRL)” active

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 12 :
Bit 1: Tick “Daytime Running Light (DRL) adjustable (Manually AND/OR instrument Cluster)”.

L’article Up! (1S) – Activate daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: Used to set up selective door unlocking.

When unlocking the vehicle, only the driver’s door is unlocked. To unlock all doors, press the remote control’s unlock button twice.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 0: Check “Selective Central Locking (Single Door Locking) active”.

L’article Up! (1S) – Selective door unlocking est apparu en premier sur VAG Coding.

Purpose: to set automatic door locking from 15km/h.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 4: Check “Auto-Lock (Automatic Locking above 15 km/h)”.

L’article Up! (1S) – Automatic door locking est apparu en premier sur VAG Coding.

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07” then click on “Long Coding Helper” .

5 – Select byte 1:
Then uncheck Bit 1: “Seatbelt warning active/installed”.

L’article Up! (1S) – Delete belt alarm est apparu en premier sur VAG Coding.

Purpose: to configure automatic door unlocking when the ignition key is removed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 3: Check “Auto-Unlock (Unlocking when Removing the Ignition Key)”.

L’article Up! (1S) – Automatic door unlocking est apparu en premier sur VAG Coding.

Purpose: To activate Coming-Home / Leaving-Home.

(To work properly, the vehicle must be equipped with a light sensor. Headlight switch must be in “Auto” position.
Without the light sensor, it will be necessary to make a headlight call to activate the coming-home).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 10 :
Bit 1: Check “Leaving-Home (LH) active”
Bit 2: Check “Coming-Home (CH) active”.

L’article Up! (1S) – Activate Coming-Home / Leaving-Home est apparu en premier sur VAG Coding.

Purpose: activates the brake/turn signal lights in flash mode during emergency braking. (On Up! phase 1 only turn signals possible)

Procedure
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 12:
Bit 3: Check “Emergency Flashing(Turn Signals) active ” (to activate turn signals)
Bit 4: Tick “Emergency Brake Flashing (Brake Light) active” (to activate brake lights)

L’article Up! (1S) – Flash mode during emergency braking est apparu en premier sur VAG Coding.