Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation.

Compatible coding for Bentley Continental GT Facelift (3W)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To suppress the brake pad indicatorsubtract 1 from these digits.

For example, if the initial coding (with the wafer indicator) is:0007101

To delete the indicator plate, simply recode as follows:0006101(07 – 01 = 06)

L’article Phaeton (3D) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer).

Compatible coding for Bentley Continental GT Facelift (3W)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To remove the ice-washer indicator, subtract 4 from these digits.

For example, if the initial coding(with washer indicator) is:0007101

To delete the windscreen washer indicator, simply recode as follows:0003101(07 – 04 = 03)

L’article Phaeton (3D) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen Phaeton (3D)
–> Buy your OBDeleven device with VAG Custom

VW Phaeton (3D) (2002-2016) / Compatible coding for Phaeton Facelift and Bentley Continental GT Facelift (3W) (2010-2016)

• Unlocking the heater
• Inspection service reset
• Oil service reset
• Test mode
• Speed limit RNS 510
• RNS 510 theme

Phaeton (3D) Facelift coding compatible with Bentley Continental GT Facelift (3W)

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps PHAETON list (3D) est apparu en premier sur VAG Coding.

Purpose: activates / deactivates the daytime running lights (DRL) on the ODB (on-board computer).

Compatible coding for Bentley Continental GT Facelift (3W)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect.” .

4 – Click on “Coding – 07” then “Long Coding Helper”.

5 – Select Byte 0 :

Bit 0 : Uncheck “Daytime Running Lights

L’article Phaeton (3D) – Activate daytime running lights (DRL) on ODB est apparu en premier sur VAG Coding.

Purpose: to activate and set the number of flashes for the “Comfort flashing” option.

Compatible coding for Bentley Continental GT Facelift (3W)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding – 07”.

5 – Select Byte 4:
Bit 3: Check the “Comfort/Tip Blinking” box

Line 2:

3 – Click on“Select” then click on“09 – Cent. Elect.”.

4– Click on“Adaptation – 10”.

5 – In the drop-down list, select Channel 01“Comfort Turn Signals (Cycles)”.

Choose a value between 1 and 5 for the number of flashes

L’article Phaeton (3D) – Comfort turn signal est apparu en premier sur VAG Coding.

Purpose: activates the brake/turn signal lights in flash mode during emergency braking.

Compatible coding for Bentley Continental GT Facelift (3W)

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select” then click on“46- Central Conv.

4 – Click on “Coding – 07” then “Long Coding Helper”

5 – Select Byte 4:
Bit 4: Check “Emergency Brake Blinking”.

L’article Phaeton (3D) – Flash mode lights during emergency braking est apparu en premier sur VAG Coding.

Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.

Compatible coding for Bentley Continental GT Facelift (3W)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To suppress the belt alarm, subtract 2 from these digits.

For example, if the initial coding (with belt alarm) is:0007101

To delete the belt alarm, simply recode as follows:0005101(07 – 02 = 05)

L’article Phaeton (3D) – Delete alarm belt est apparu en premier sur VAG Coding.

Purpose: Used to set up selective door unlocking.

Compatible coding for Bentley Continental GT Facelift (3W)

When the vehicle is unlocked, only the driver’s door and the rear door on the driver’s side, depending on the coding, will be unlocked. To unlock all doors, press the remote control’s unlock button twice.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Adaptation 10”.

5 – Channel 01:

Set to 1 to unlock driver’s door only
Set to 2 to unlock driver’s side front and rear doors only

L’article Phaeton (3D) – Selective door unlocking est apparu en premier sur VAG Coding.

Purpose: to set automatic door locking from 15 km/h.

Compatible coding for Bentley Continental GT Facelift (3W)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Adaptation 10”.

5 – Channel 02 (drop-down list (Auto-Lock)) Set value to 1

L’article Phaeton (3D) – Automatic door locks est apparu en premier sur VAG Coding.

Purpose: to set automatic door unlocking when the key is removed.

Compatible coding for Bentley Continental GT Facelift (3W)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Adaptation 10”.

5 – Channel 03 (drop-down list (Auto-Unlock)) Set value to 1

L’article Phaeton (3D) – Automatic door unlocking est apparu en premier sur VAG Coding.