OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen New Beetle (1C)
–> Buy your OBDeleven device with VAG Custom

VW New Beetle (1C/1Y/9C) New Beetle (1998-2011)

• Activate Bluetooth RNS315
• Automatic locking/unlocking
• Change language
• Heating test
• Unlocking the heater
• Lock/unlock confirmation
• Oil service reset
• PTT button options
• CD lock RNS 310/315
• RNS 310/315 developer menu
• Image OPS RNS 310/315
• RNS 310/315 SDS reversing camera
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Visual confirmation

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article List OBDeleven One-Click Apps NEW BEETLE (1C) est apparu en premier sur VAG Coding.

Purpose : To change the language of the ODB. (Highline MFA)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04

Set the value according to the selected language

1 = German
2 = English
3 = French
4 = Italian
5 = Spanish
6 = Portuguese

L’article New Beetle (1C) – Change ODB language est apparu en premier sur VAG Coding.

Purpose : Allows you to modify the type of tone and duration of the horn sound, depending on the country.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 10

Select :

1 – RoW (Rest of the World)
2 – Germany
3 – Great Britain

L’article New Beetle (1C) – Horn setting est apparu en premier sur VAG Coding.

Purpose: to activate the speed governor after retrofitting.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “01 – Motor”.

4 – Click on “Access – 11” then enter the code “11463”

L’article New Beetle (1C) – Cruise control activation (retrofit) est apparu en premier sur VAG Coding.

Purpose : To configure automatic door locking at speeds over 15 km/h.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 03 (“Auto-Lock” in drop-down list)

Set value 1

L’article New Beetle (1C) – Automatic door locks est apparu en premier sur VAG Coding.

Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The first two digits of the code (??xxxx) are used to modify the Instrument module options. To suppress the belt alarm, subtract 2 from these digits.
Example of initial coding (with belt alarm): 03142
To delete the belt alarm, simply recode as follows: 01142 (03 – 02 = 01)

OR

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07” then click on “Long Coding Helper” .

5 – Select byte 1:
Then uncheck Bit 1: “Seatbelt warning active/installed”.

L’article New Beetle (1C) – Delete belt alarm est apparu en premier sur VAG Coding.

Purpose: Resets the configuration of all keys.

ATTENTION: No more keys will be recognized with the vehicle.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 00

Set value to 0 and save

L’article New Beetle (1C) – Reset keys est apparu en premier sur VAG Coding.

Purpose: Selects the duration of mirror defrosting.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on ” Select ” then click on ” 09 – Centrale Elec..

4 – Click on “Adaptation – 10”.

5 – Select Channel 03 (“Mirror Heating Activation Time” in the drop-down list)

Set a value between 1 and 254 (from 0.66 min to 173 min)
Default value (until April 2002) is 29 (20 min)
Default value (since April 2002) is 254 (allows defrost to run all the time)

L’article New Beetle (1C) – Mirror defrost duration est apparu en premier sur VAG Coding.

Purpose: Selects rear defrost duration.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel 04 (“Rear Windshield Heating Activation Time” in the drop-down list)

Set a value between 1 and 254 (from 0.66 min to 173 min)
Default value is 29 (20 min)
254 allows defrost to run all the time

L’article New Beetle (1C) – Rear defrost duration est apparu en premier sur VAG Coding.

But : Permet de sélectionner le type d’ouverture des portières après appui sur la télécommande.

Sélectif: un appui déverrouille uniquement la portière conducteur, deux appuis déverrouille toutes les portières.
Toutes les portières: un appui déverrouille toutes les portières.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” 46 – Comfort Module“.

4 – Click on ” Coding- 07“.

2 doors / 2 electric windows
selective: set value to 00064
all doors: set value to 00065

L’article New Beetle (1C) – Selective unlocking / all doors est apparu en premier sur VAG Coding.