OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen Lupo (6E)
–> Buy your OBDeleven device with VAG Custom

VW Lupo 6E (1998-2005)

• Oil service reset
• Automatic locking/unlocking
• Brake pad wear indicator
• Central locking
• Change language
• Country setting for horn
• Inspection service reset
• Instrument cluster region
• Inside surveillance
• Lock/unlock confirmation
• Seat belt warning
• Visual confirmation

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps LUPO list (6E) est apparu en premier sur VAG Coding.

Purpose : Allows you to modify the type of tone and duration of the horn sound, depending on the country.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 10

Select :

1 – RoW (Rest of the World)
2 – Germany
3 – Great Britain

L’article Lupo (6E) – Horn setting est apparu en premier sur VAG Coding.

Purpose: Resets the configuration of all keys.

ATTENTION: No more keys will be recognized with the vehicle.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 00

Set value to 0 and save

L’article Lupo (6E) – Reset keys est apparu en premier sur VAG Coding.

Purpose : to configure the keys to be used with the vehicle.

WARNING: This procedure does not configure keys with immobilizer.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 01 (“Remote Control Adaptation” in the drop-down list)

Enter the number of keys to be adapted. Save.
Now press button 1 or 2 on each remote control to be adapted for at least 1 second. (A horn beep will confirm the procedure).
All keys must be adapted in a single procedure.
Configuration of all keys should not exceed 15 sec.

L’article Lupo (6E) – Key configuration est apparu en premier sur VAG Coding.

Purpose : to select the type of door opening when the remote control is pressed.

Selective: one press unlocks only the driver’s door, two presses unlocks all doors.
All doors: one press unlocks all doors.

Coding depends on number of doors and number of power windows

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Coding- 07”.

2 doors / 2 electric windows
selective: set value to 00065
all doors: set value to 00064

L’article Lupo (6E) – Selective unlocking / all doors est apparu en premier sur VAG Coding.

Purpose : To configure automatic door locking at speeds over 15 km/h.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 03 (“Auto-Lock” in drop-down list)

Set value 1

L’article Lupo (6E) – Automatic door locks est apparu en premier sur VAG Coding.

Purpose : to configure automatic door unlocking when the ignition key is removed.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04 (“Auto-Unlock” in drop-down list)

Set value 1

L’article Lupo (6E) – Automatic door unlocking est apparu en premier sur VAG Coding.

Purpose : Activates beeps when vehicle is unlocked.

Only for vehicles with alarm
(2 beeps for unlocking)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 06 (“Unlocking Confirmation (Beep)” in the drop-down list)

Set value 1

L’article Lupo (6E) – Vehicle unlocking confirmation (beeps) est apparu en premier sur VAG Coding.

Purpose : Activates beeps when vehicle is locked.

Only for vehicles with alarm
(1 beep for locking)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 07 (“Locking Confirmation (Beep)” in the drop-down list)

Set value 1

L’article Lupo (6E) – Vehicle lock confirmation (beeps) est apparu en premier sur VAG Coding.

Purpose : activates turn signals when vehicle is unlocked.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 08 (“Unlocking Confirmation (Blink)” in the drop-down list)

Set value 1

L’article Lupo (6E) – Vehicle unlocking confirmation (turn signals) est apparu en premier sur VAG Coding.