Purpose: to display the amount of fuel topped up on the ODB (on-board computer).


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments“.

4 – Click on “Adaptation – 10” .

5 – Select “Volume to be Replenished” from the value list.

Select ” Yes ” in the second value list.

L’article Golf 6 (5K) – Make-up quantity display on ODB est apparu en premier sur VAG Coding.

Purpose: to correct the fuel consumption display on the on-board computer.

Modification only possible on Mid/High range models.
Note: modifications affect the display of instantaneous consumption, average consumption and fuel quantity.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Adaptation- 10”.

5 – Select Channel 03 “Consumption Correction”.

Adjust consumption correction factor between 85% and 115%. (base value: 100)

Example 1: Calculation based on volume per distance (e.g. l/100 km): DIS: 9.3 l/100 km. Actual: 9.8 l/100 km. (100, 9,8 / 9,73 ? 105,38) Channel 3 will be changed from 100 to 105
Example 2: Calculation based on volume distance (e.g. MPG is: DIS: 23 MPG. Actual: 24 MPG. (100, 23/24 and 95.83) Channel 3 will be changed from 100 to 96

L’article Golf 6 (5K) – Correction of ODB consumption display est apparu en premier sur VAG Coding.

Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation” (RNS) or“56 – Radio” (RCD)

4 – Click on“Coding 07” then “Long Coding Helper”.

5 – Choose Byte 6 or 9

Selectthe vehicle from the drop-down menu:

00 = via CAN
01 = Polo 6R
02 = New Beetle
03 = New Beetle Cabrio
04 = Scirocco
05 = Golf 5
06 = Jetta
07 = Golf 6 Variant
08 = Golf 6 Cabrio
09 = Touran
0A = Golf Plus
0C = Tiguan
0D = Sharan
0E = EOS
0F = Passat 3C
10 = Passat Limousine
11 = Passat Variant
13 = Caddy
14 = T5
2C = Skoda Octavia
2D = Skoda Octavia Kombi
2E = Skoda Superb Kombi

Exit the module and save your changes. The RCD or RNS must now be restarted for the changes to take effect. Press both arrows and the star for 6s.

L’article Golf 6 (5K) – Changing the image of the RCD/RNS OPS est apparu en premier sur VAG Coding.

Purpose : to open the tailgate automatically by remote control once the trunk release function has been activated. (Retrofit with Cylinder)

Equipment:

– 2 Skoda Fabia tailgate cylinders 6Y0 827 550 C
Note: Version A cylinders are slightly too short by 1cm and are not suitable.
– 2 Scirocco gas stops, 1K8 827 761 C (optional).
Note: For best cylinder deployment performance in cold weather, we recommend Scirocco stops. Golf stops will also work, but below 4°C, they may be more delicate to open, and therefore lose automatic mode. If you choose to keep your Golf VI stops, you don’t need to change anything.

If you have a 2010 or later chassis, no additional coding by VAG COM is necessary.
On the other hand, if you have a 2009 or earlier chassis, you must recode the 46 ECU.
Coding after assembly :

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding – 07” then on “Long Coding Helper”.

Byte 2:
Bit 3: Check “Central Locking (Rear Lid) Softtouch (direct open/no release)”.

Simply press the trunk button on the key for 2s.
The trunk will open automatically.

Note: Trunk closure is a little harder.

L’article Golf 6 (5K) – Automatic tailgate opening (retrofit) est apparu en premier sur VAG Coding.

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07” then click on “Long Coding Helper” .

5 – Select byte 1:
Then uncheck Bit 0: “Brakepad warning active/installed”.

L’article Golf 6 (5K) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07” then click on “Long Coding Helper” .

5 – Select byte 1:
Then uncheck Bit 2: “Washer Fluid warning active/installed”.

L’article Golf 6 (5K) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

Purpose: to activate voice control on the RNS 510 (SDS).

ATTENTION: RNS 510 firmware must be version v2660.

Activating voice control brings up the “Voice control” menu in the RNS 510’s SETUP menu.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3, check the box for“Bit 1: Microphone Diagnostics active”.

Byte 7, uncheck the box for“Bit 1: Voice Control inactive”.

To install the microphone, connect the microphone lead to the rear of the RNS 510. Connect to pins (Mic-)C1 and (Mic+)C7.

L’article Golf 6 (5K) – Activate RNS 510 voice control est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen Golf 6 MK6 (5K)
–> Buy your OBDeleven device with VAG Custom

VW Golf 6 MK6 (5K) (2008-2012) / VW EOS (1F) Facelift / GOLF 6 GTI / 6R / Golf Plus / Jetta VI

• Activate Bluetooth RNS315
• Air recirculation memory
• Audio volume down
• Automatically folding mirrors
• Automatic locking/unlocking
• Brake assist parameters
• Brake pad wear indicator
• Central locking with IGN
• Comfort turn signals
• Time to return home
• Bending lights
• Bending lights with reverse
• Driver’s seat heating memory
• Driving school mode
• DRL Gradation
• DRL in MFD+
• DRL indicator in dashboard
• DRL OFF with handbrake ON
• DRL parameters
• DRL with ADL
• Dynamic steering recommendation
• Flashes emergency brake with trailer
• Emergency brake lights
• ESC deactivation
• ESC V2 deactivation
• Fog lamps with high beam
• Floor lighting
• Front door exit lights
• Front parking assistance volume
• Front parking assistance tone
• Headlamp washer
• Heating test
• Unlocking the heater
• High beam assistance by region (LHD/RHD)
• Recognition of high beam assistance in town
• High beam speed threshold
• Freeway lights
• Hill-hold assist
• Hill-hold assist settings
• Reset inspection service
• Departure time
• LED license plate lights
• Low beam speed threshold
• Mirror Dip V2
• MirrorLink on the move 1
• MirrorLink on the move 2
• Needle sweep
• Oil service reset
• Parking assistance confirmation sound
• PTT button options
• Rain lights
• Rear door exit lights
• Rear parking assistance volume
• Rear parking assistance tone
• Drop-shaped rear wiper
• Rear wiper
• Remote window function
• CD lock RNS 310/315
• RNS 310/315 developer menu
• Image OPS RNS 310/315
• RNS 310/315 SDS reversing camera
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Seat belt warning
• Synchronized mirror adjustment
• Teardrop wipe
• TSC
• Windshield washer fluid Indicator
• Window and mirror heater activation time
• Windshield wiper control
• XDS activation
• XDS parameters
• Air conditioning damper calibration
• Automatic rear lid lock
• Automatic closing in case of rain
• Brake lights with ignition
• Central locking
• CH light mode
• CH light timer function
• CH/LH lights
• CH/LH lights via dipped beam/fog lights
• Comfort flashing
• Comfort opening type for sunroof
• Comfort function for driver’s window
• Comfort operation for sunroof
• Comfort windows
• Comfort window operation with door locks
• Correction of consumption display
• Delay alarm activation
• DRL inactive when indicators are active
• Activate rear wiper when in reverse gear
• Motor fan test
• Attenuation of floor lighting with door open
• Resetting the fuel pressure regulator
• Headlight dimming
• Headlights for right/left-hand traffic
• Instrument cluster language
• Turn signal lock/unlock confirmation
• Horn lock/unlock confirmation
• Multifunction display
• Scanning needle V2
• Permanent position lights
• Installation of puddle lights
• Rear fog lamp deactivated when main beam is on
• Rear wiper with front wiper (interval)
• Rear wiper with front wiper (permanent)
• Fuel quantity in instrument panel
• Remote key coupling
• Disabling the Start/Stop system
• Rear light dimming
• Visual confirmation for comfort operation
• Windows/sunroof with ignition
• Cruise control
• Engine oil type
• Front door exit lights V2
• Fuel system priming
• Inspection service distance
• Inspection service interval
• LED taillight
• Mirror scan V1
• Multimedia restart
• Oil change service distance
• Oil change service interval
• One-touch power window settings
• V2 rear door exit lights
• Warning of impending maintenance

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article List OBDeleven One-Click Apps GOLF 6 (5K) est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS 510 navigation screen.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation”.

4 – Click on“Coding 07”. Then “Long Coding Helper”.

5 – Select Byte 7
Activate Bit 2: Speed Threshold for Destination Input active

+ use voice command to activate Bit 3: Speed Threshold for Speech Destination Input active

L’article Golf 6 (5K) – Speed limit display RNS 510 est apparu en premier sur VAG Coding.

Purpose: to deactivate the fog lamps when the high beam is switched on, so that they don’t go out when the high beam is switched on.

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 14: Deactivate Bit 2 “Fog Lights inactive with High Beams active”

L’article Golf 6 (5K) – Fog lamps with high beam est apparu en premier sur VAG Coding.