Purpose: to activate voice control on the RNS 510 (SDS).

ATTENTION: RNS 510 firmware must be version v2660.

Activating voice control brings up the “Voice control” menu in the RNS 510’s SETUP menu.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3, check the box for“Bit 1: Microphone Diagnostics active”.

Byte 7, uncheck the box for“Bit 1: Voice Control inactive”.

To install the microphone, connect the microphone lead to the rear of the RNS 510. Connect to pins (Mic-)C1 and (Mic+)C7.

L’article CC (35) Facelift – Activate RNS 510 voice command est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen Passat CC (35)
–> Buy your OBDeleven device with VAG Custom

VW Passat CC 35 (2008-2016) / Passat CC Facelift (specific facelift coding at bottom of page) / More coding on Passat (B6/B7)

• Activate Bluetooth RNS315
• Air recirculation memory
• Automatically folding mirrors
• Brake pad replacement
• Comfort windows
• Driver’s seat heating memory
• Heating test
• Unlocking the heater
• High beam assistance by region (LHD/RHD)
• High beam assistance city recognition
• High beam speed threshold
• Inspection service reset
• Low beam speed threshold
• MirrorLink on the move 1
• MirrorLink on the move 2
• Oil service reset
• PTT button options
• CD lock RNS 310/315
• RNS 310/315 developer menu
• Image OPS RNS 310/315
• RNS 310/315 SDS reversing camera
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Seat belt warning
• Run the lights as position lights
• V2 automatic folding mirrors
• Motor fan test
• Engine oil Type
• Inspection service distance
• Inspection service interval
• Oil change service distance
• Oil change service interval

VW Passat CC 35 Facelift (2012-2016)

• Activate Bluetooth RNS315
• Air recirculation memory
• Automatically folding mirrors
• Brake pad wear indicator
• Brake pad replacement
• Comfort flashing light
• Comfort windows
• Bending lights
• Bending lights with reverse
• Driver’s seat heating memory
• DRL in MFD+
• DRL indicator in dashboard
• DRL OFF with handbrake ON
• DRL parameters
• Emergency brake lights
• Floor lighting
• Headlamp washer
• Heating test
• Unlocking the heater
• High beam assistance by region (LHD/RHD)
• Recognition of high beam assistance in town
• High beam speed threshold
• Hill-hold assist settings
• Inspection service reset
• LED license plate lamps
• Low beam speed threshold
• MirrorLink on the move 1
• MirrorLink on the move 2
• Oil service reset
• PTT button options
• RNS 310/315 CD lock
• RNS 310/315 Developer menu
• RNS 310/315 OPS Image
• RNS 310/315 Reversing camera
• RNS 310/315 SDS
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Seat belt warning
• Washer fluid indicator
• V2 automatic folding mirrors
• V3 automatic folding mirrors
• Motor fan test
• Engine oil type
• Inspection service distance
• Inspection service interval
• Hollow mirror
• Multimedia restart
• Multimedia security notice
• Oil change service distance
• Oil change service interval
• Warning of impending maintenance
• Disabling the Start/Stop system

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps CC list (35) est apparu en premier sur VAG Coding.

Purpose: Activates the hidden menu in RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.56 – Radio” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 50 then set the value to 1

Restart the RNS 510.

To launch the Hidden Menu, press SETUP (for 6s)

L’article CC (35) Facelift – Activate hidden menu RNS 510 est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS 510 navigation screen.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation”.

4 – Click on“Coding 07”. Then “Long Coding Helper”.

5 – Select Byte 7
Activate Bit 2: Speed Threshold for Destination Input active

+ use voice command to activate Bit 3: Speed Threshold for Speech Destination Input active

L’article CC (35) Facelift – Speed limit display RNS 510 est apparu en premier sur VAG Coding.

Purpose: to change the display theme of the RCD 510 and RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation” for RNS510 and “56 – Radio” for RCD510.

4 – Click on“Coding 07” then “Long Coding Helper”.

5 – Select Byte 7

Bit 4-5: Select from 3 themes
“00 Display Variant: Highline
“10 Display Variant: Sportsline
“20 Display Variant: Premium

Exit the module and save your changes. The RCD / RNS 510 must now be restarted for the changes to take effect. Press both arrows and the star for 6s.

L’article CC (35) Facelift – Change the RCD/RNS 510 theme est apparu en premier sur VAG Coding.

Purpose: locks/unlocks the RNS 510’s CD/DVD eject button.

Protection against theft of your navigation DVD.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program. 37 – Navigation” .

4 – Click on “Adaptation – 10”.

5 – Select Channel 43 (Ejection Lock) then set the value to 1 (CD/DVD Ejection Lock active)

Restart the RNS 510.

L’article CC (35) Facelift – Locking the CD/DVD eject button on the RNS 510 est apparu en premier sur VAG Coding.

Purpose : Allows you to change the Push-To-Talk (PTT) button on the bottom left of your multifunction steering wheel, to act as a mute button for sound volume.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “16 – Multifunction steering wheel”.

4 – Click on“Coding- 07”. then click on“Long Coding Helper”.

5 – Select Byte 1:
Bit 3: Uncheck “Multi-Function-Steering-Wheel (MFSW) with Push-To-Talk (PPT) Button installed”.

The Push-to-Talk (PPT) button now acts as a mute button.

L’article CC (35) Facelift – Mute Push-To-Talk button est apparu en premier sur VAG Coding.

Purpose: to activate Bluetooth on the RNS 315.

ATTENTION: Not all RNS-315 are equipped with a Bluetooth module.

You can also remove the RNS 315 from its slot to check. Behind it, you’ll find a label with the RNS-315’s MAC address.
If the MAC address contains only zeros (MAC: 00:00:00:00:00:00), your RNS-315 is not equipped with the Bluetooth module.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3
Bit 5: Uncheck the “Telephone Transceiver inactive” box

L’article CC (35) Facelift – Activating Bluetooth on the RNS 315 est apparu en premier sur VAG Coding.

Purpose: to activate the hidden menu in RNS 315.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Adaptation – 10”.

5 – Select Developer mode (temporary) then set the value to Enabled

Restart RNS 315.

To launch the Hidden Menu, press SETUP (for 6s)

L’article CC (35) Facelift – Activate hidden menu RNS 315 est apparu en premier sur VAG Coding.

Purpose : Allows mirrors to be folded down even after the ignition has been switched off and a door opened.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on “Select”, then click on “42 – Driver’s door”.

4 – Click on“Security Access – 16” then enter the code“04354”.

5 – Click on “Adaptation – 10”.

6 – Select Channel “System_Parameter_0” from the drop-down list.

Replace Value 90 (if several values, the 90 is in the middle, e.g.: xxxx90xxxx )

Set value according to mirror opening mode:
– 95 (mirrors will deploy when door is opened)
– 99 (mirrors will deploy when ignition is switched on)

If coding doesn’t work, can be activated with VCP

L’article CC (35) Facelift – Automatically folding mirrors est apparu en premier sur VAG Coding.