OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Skoda Roomster (5J)
–> Buy your OBDeleven device with VAG Custom

Skoda Roomster 5J (2006-2015) / (Praktik) For Facelift only :

• Inspection service reset
• Oil service reset
• ATWS country setting
• Automatic locking/unlocking
• Automatic tailgate locking/unlocking
• Central locking with IGN
• Central locking
• CH/LH lights
• CH/LH variant
• Comfort flashing light
• Comfort flashing light (cycles)
• Comfort windows
• Time to return home
• Bending lights
• Bending lights with reverse
• Clutch message display
• Daytime running lights on/off
• DRL in MFD+
• DRL OFF with handbrake
• Emergency brake lights
• Fog lamps with high beam
• Front wiper operating mode/position
• Fuel system priming
• Headlamp washer
• Heated mirrors
• Hill-start assist
• Tilt sensor sensitivity
• Inside surveillance
• Sensitivity of interior surveillance
• Departure time
• Acoustic confirmation of locking/unlocking
• Mirror heating
• Parking light function
• Wiping the reverse gear
• Seat belt warning
• Teardrop wipe
• Teardrop wipe
• Visual confirmation
• Visual confirmation for comfort Operation
• XDS activation
• Motor fan test
• Engine oil type
• Maintenance distance
• Service interval
• Oil change service distance
• Oil change service interval

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps ROOMSTER list (5J) est apparu en premier sur VAG Coding.

Purpose: Allows you to add a Driving School mode view to the RCD 210, RCD 310 that displays turn signals, speed … (Also ideal for accompanied driving)


Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“56 – Radio”.

4 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Channel 2”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“1” and confirm.

L’article Roomster (5J) – Activate Driving School mode (RCD 210/RCD 310) est apparu en premier sur VAG Coding.

Purpose: to set automatic door unlocking when the vehicle has been unlocked but no doors have been opened for 30 seconds.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 4:
Bit 5: Uncheck “Central Locking Re-locking (after 30 seconds) active”.

L’article Roomster (5J) – Automatic door locking after 30s est apparu en premier sur VAG Coding.

Purpose: to set automatic door locking from 15km/h.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 4: Check “Auto-Lock (Automatic Locking above 15 km/h)”.

L’article Roomster (5J) – Automatic door locking est apparu en premier sur VAG Coding.

Purpose: Eliminates the error on the ODB when replacing original license plate light bulbs with non-error LEDs.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “ Coding – 07 ”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 11 :
Bit 7: Uncheck “Lamp diagnotics for Lisense Plate Light active”.

L’article Roomster (5J) – Delete ODB error (LED license plate light) est apparu en premier sur VAG Coding.

Purpose: to set the frequency of rear beeps during parking assistance.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “10-Station assistance”.

4 – Click on “ Adaptation – 10 ”.

5 – Select “Speaker frenquency for rear parking aid” from the value list:

Selecta frequency from Stage 1 (Low) to Stage 9 (High) in the second drop-down list.

L’article Roomster (5J) – Parking aid beep frequency setting est apparu en premier sur VAG Coding.

Purpose: Used to set up selective door unlocking.

When unlocking the vehicle, only the driver’s door is unlocked. To unlock all doors, press the remote control’s unlock button twice.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 0: Check “Selective Central Locking (Single Door Locking) active”.

L’article Roomster (5J) – Selective door unlocking est apparu en premier sur VAG Coding.

Purpose: to configure automatic door unlocking when the ignition key is removed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 3: Check “Auto-Unlock (Unlocking when Removing the Ignition Key)”.

L’article Roomster (5J) – Automatic door unlocking est apparu en premier sur VAG Coding.

Purpose: to deactivate the automatic engagement of the rear wiper when reversing.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Cent. Elect.” . Switch on the ignition and run the VCDS program. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on “Coding 07”.

5 – Click on “Long Coding Helper” :

6 – In the window that appears,

Byte 14 :
Bit 3: Uncheck “Comfort Funtion for Rear Wiper active”.

L’article Roomster (5J) – Deactivate rear wiper when reversing est apparu en premier sur VAG Coding.

Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “10-Station assistance”.

4 – Click on “ Adaptation – 10 ”.

5 – Select “Parking aid activation activation tone” from the value list:

Select “Off” in the second value list

L’article Roomster (5J) – Disable parking aid beep est apparu en premier sur VAG Coding.