Purpose: to activate voice control on the RNS 510 (SDS).

ATTENTION: RNS 510 firmware must be version v2660.

Activating voice control brings up the “Voice control” menu in the RNS 510’s SETUP menu.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3, check the box for“Bit 1: Microphone Diagnostics active”.

Byte 7, uncheck the box for“Bit 1: Voice Control inactive”.

To install the microphone, connect the microphone lead to the rear of the RNS 510. Connect to pins (Mic-)C1 and (Mic+)C7.

L’article Rapid (NH) – Activate RNS 510 voice control est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Skoda Rapid (NH)
–> Buy your OBDeleven device with VAG Custom

Skoda Rapid NH (2012-2019)

2012-2015 :

• Acoustic lock confirmation
• Automatic locking/unlocking
• Central locking with IGN
• Central locking settings
• CH/LH light variant
• Comfort flashing light
• Time to return home
• Emergency brake lights
• Gauge test – Needle sweep
• Headlamp washer
• Inspection service reset
• Departure time
• Oil service reset
• Parking light
• CD lock RNS 310/315
• RNS 310/315 developer menu
• Image OPS RNS 310/315
• RNS 310/315 SDS reversing camera
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Seat belt warning
• Drop wiping
• Brake assist settings
• Brake disc drying
• CH/LH lights
• Correction of consumption display
• Hill-start assist
• Hill-start assist setting
• Phone connection tone
• Rear wiper with reverse Speed
• The horn is always ready for use
• Management response
• Motor 1 fan test
• Motor 2 fan test
• Engine oil type
• Feeding system priming
• Inspection service distance
• Inspection service interval
• Multimedia security disclaimer
• Oil change service distance
• Oil change service interval
• Warning of impending maintenance
• Speed-dependent wipers

2015-2019 :

• Central locking with IGN
• DRL settings in main unit
• DRL disabled with handbrake
• Gauge test – Needle sweep
• Headlamp washer
• Basic headlight settings
• Inspection service reset
• Stopwatch
• Acoustic confirmation of locking/unlocking
• MirrorLink on the move
• Oil service reset
• Oil temperature in DIS
• Open door alarm
• Fuel quantity in instrument panel
• Trunk release/remote trunk release
• Scandinavian DRL
• Seat belt warning
• Disabling the Start/Stop system
• Static bend lights
• Vehicle trajectory display
• Video in motion
• Remote window operation
• Bulb diagnostics: reversing lights
• Type of CH light activation
• CH/LH light variant
• Comfort turn signals
• Time to return home
• Turn signal dimming rate
• Disable AM radio
• DRL activated with AUTO
• DRL with fog lights
• DRL deactivated with V2 handbrake
• Fog lights with high beam
• Fog lights with turn signal
• Floor lights
• Floor lights Brightness
• Front fog lights in reverse
• Gauge test – Needle sweep V2
• Emergency switch brightness
• Number of headlamp washer activations
• Headlamp washer activation delay
• Headlamp washer activation time
• Road lights without IGN
• Hill-start assist
• Enhanced engine responsiveness
• Departure time
• LED license plate lamps
• License plate lights with DRL
• License plate lights with trunk open
• Parking lights on both sides
• Rear fog light warning
• Static bend light parameters
• Rear lights when trunk is open
• Teardrop wipe
• Third brake light with lock/unlock function
• Turn signals when trunk is open
• Turn signals with CH/LH
• American-style turn signals
• American-style turn signals with DRL
• Burglar alarm system
• Automatic locking/unlocking
• Battery capacity
• Battery type
• Brake light test
• Stop lights with door open
• Correction of consumption display
• Discover the Green Engineering menu
• Door lock test All
• Daytime running lights in reverse
• Emergency brake lights
• Engine oil type
• Left front door lock test
• Pace-Car “Urban Joke” front turn signals
• Right front door interlock test
• Feeding system priming
• Headlamp washer test
• Turn signals with comfort windows
• Inspection service distance
• Inspection service interval
• Interior light discoloration
• LED front fog lights
• Light sensor sensitivity
• Rear-view mirror indicators with CH/LH
• Multimedia restart
• Multimedia security notice
• Oil change service distance
• Oil change service interval
• Parking aid activation tone
• Parking aid audio volume reduction
• Parking aid deactivation speed
• Left rear door lock test
• Right rear door lock test
• Automatic rear wiper activation
• Back-up light test
• Warning of impending maintenance
• Horn warning still operational
• Management response
• Accelerator pedal response
• TPMS reset
• Transmission calibration
• Turn signal test

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps RAPID list (NH) est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS 510 navigation screen.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation”.

4 – Click on“Coding 07”. Then “Long Coding Helper”.

5 – Select Byte 7
Activate Bit 2: Speed Threshold for Destination Input active

+ use voice command to activate Bit 3: Speed Threshold for Speech Destination Input active

L’article Rapid (NH) – Speed limit display RNS 510 est apparu en premier sur VAG Coding.

Purpose: Enables the display of OPS speed cameras on the car radio screen.

Please note: The vehicle must be equipped with a compatible car radio (RCD-310, RCD-510, RNS-315, RNS-510).

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“10-Station assistance”.

4 – Click on“Security Access – 16” then enter the code“71679”.

5 – Click on“Coding- 07”. then click on“Long Coding Helper”.

6 – Select Byte 0:
Bit 4: Tick “Optical illustration active”.

L’article Rapid (NH) – OPS speed cameras displayed on car radio screen est apparu en premier sur VAG Coding.

Purpose: Activates the hidden menu in RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.56 – Radio” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 50 then set the value to 1

Restart the RNS 510.

To launch the Hidden Menu, press SETUP (for 6s)

L’article Rapid (NH) – Activate hidden menu RNS 510 est apparu en premier sur VAG Coding.

Purpose: to activate the hidden menu in RNS 315.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Adaptation – 10”.

5 – Select Developer mode (temporary) then set the value to Enabled

Restart RNS 315.

To launch the Hidden Menu, press SETUP (for 6s)

L’article Rapid (NH) – Activate hidden menu RNS 315 est apparu en premier sur VAG Coding.

Purpose: to activate Bluetooth on the RNS 315.

ATTENTION: Not all RNS-315 are equipped with a Bluetooth module.

You can also remove the RNS 315 from its slot to check. Behind it, you’ll find a label with the RNS-315’s MAC address.
If the MAC address contains only zeros (MAC: 00:00:00:00:00:00), your RNS-315 is not equipped with the Bluetooth module.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3
Bit 5: Uncheck the “Telephone Transceiver inactive” box

L’article Rapid (NH) – Activate Bluetooth on RNS 315 est apparu en premier sur VAG Coding.

Purpose: to change the display theme of the RCD 510 and RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation” for RNS510 and “56 – Radio” for RCD510.

4 – Click on“Coding 07” then “Long Coding Helper”.

5 – Select Byte 7

Bit 4-5: Select from 3 themes
“00 Display Variant: Highline
“10 Display Variant: Sportsline
“20 Display Variant: Premium

Exit the module and save your changes. The RCD / RNS 510 must now be restarted for the changes to take effect. Press both arrows and the star for 6s.

L’article Rapid (NH) – Change the theme of RCD/RNS 510 est apparu en premier sur VAG Coding.

Purpose: locks/unlocks the RNS 510’s CD/DVD eject button.

Protection against theft of your navigation DVD.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program. 37 – Navigation” .

4 – Click on “Adaptation – 10”.

5 – Select Channel 43 (Ejection Lock) then set the value to 1 (CD/DVD Ejection Lock active)

Restart the RNS 510.

L’article Rapid (NH) – Lock the CD/DVD eject button on the RNS 510 est apparu en premier sur VAG Coding.

Purpose: Allows you to add a Driving School mode view to the RCD 210, RCD 310 that displays turn signals, speed … (Also ideal for accompanied driving)


Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“56 – Radio”.

4 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Channel 2”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“1” and confirm.

L’article Rapid (NH) – Activate driving-school mode (RCD 210/RCD 310) est apparu en premier sur VAG Coding.