Purpose: to correct the fuel consumption display on the Trip Computer/Virtual Cockpit.

Note: these changes affect the display of instantaneous consumption, average consumption and fuel quantity.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Adaptation- 10”.

5 – Select Channel: “Display correction of consumptions and operating range”.

Adjust consumption correction factor between 85% and 115%. (base value: 100)

Example 1: Calculation based on volume per distance (e.g. l/100 km): DIS: 9.3 l/100 km. Actual: 9.8 l/100 km. (100, 9,8 / 9,73 ? 105,38) Channel 3 will be changed from 100 to 105.
Example 2: Calculation based on volume distance (e.g. MPG is: DIS: 23 MPG. Actual: 24 MPG. (100, 23/24 and 95.83) Channel 3 will be changed from 100 to 96.

Example 3: the consumption announced by the ODB is 5.9l/100km, after checking it is actually 6.3l/100km.
Calculation of the rate to be entered: (6.3 * 100) / 5.9 = 106.78. The rate used will be 107%, and the consumption announced by the ODB will be a pessimistic 0.1l/100km.

Consumption is immediately modified on the MMI.

L’article Kamiq (NW) – Correction of ODB consumption display est apparu en premier sur VAG Coding.

Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic).
Warning: if you have the driving mode selection, do not modify!

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance”.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Courbes caractéristiques d’assistance de direction” /“Characteristic curve of steering assistance”

7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On this, choose the value:“Confort” or “Dynamic” then validate.

selection_by_charisma: You have the driving modes, do not modify this value otherwise you will lose the hardness of the steering wheel according to your driving mode!

L’article Kamiq (NW) – Modify power steering hardness est apparu en premier sur VAG Coding.

Purpose: to adjust the intensity of the hands-free system’s microphone.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Microphone sensitivity” or “Mikrofonempfindlichtkeit”.

7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose a value expressed in“dB” (default value“0 dB”) then validate.

L’article Kamiq (NW) – Microphone sensitivity adjustment est apparu en premier sur VAG Coding.

Purpose: To deactivate / remove MirrorLink from SmartLink on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on Android natively. For direct connection to Android Auto.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103“.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle configuration-Mirror_link“.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Disabled” and confirm.

L’article Kamiq (NW) – Deactivate MirrorLink est apparu en premier sur VAG Coding.

Purpose: to display oil temperature on the ODB/Virtual Cockpit.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper” .

5 – Select byte“10”
Then check Bit“1”:“Display Oil Temperature”.

L’article Kamiq (NW) – Oil temperature on ODB est apparu en premier sur VAG Coding.

Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic” /“08 – Auto HVAC”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“11”
Then select Bit“0-1”:“Blower display in Auto mode, enabled”.

L’article Kamiq (NW) – Fan speed display for air conditioning in Auto mode est apparu en premier sur VAG Coding.

Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “10 – Assistance stationnt”.

4 – Click on“Security Access – 16” then enter the code“71679”.

5 – Click on “Adaptation – 10”.

6 – Select “Tonalité d’activation de l’aide au stationnement ” / “Park assist activation tone ” / “Aktivierungston für Einparkhilfe ” from value list

7 – Select “Off” in the second value list

L’article Kamiq (NW) – Deactivation of parking aid activation beep est apparu en premier sur VAG Coding.

Purpose: Automatically activates the Coming Home function (no need to make a headlight call).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Comfort illumination-Coming Home Verbaustatus”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“automatic” and confirm.

L’article Kamiq (NW) – Coming Home automatic est apparu en premier sur VAG Coding.

Purpose: activates window operation (close/open) with ignition off and door open.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access control 2-Freigabenachlauf FH bei Kl 15 aus”.

7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“active”, then confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access control 2-Freigabenachlauf FH bei Tueroeffnen abbrechen”.

7 – On the same page, there’s a second drop-down menu at the bottom of the page.
On this menu, select“not active”, then confirm.

L’article Kamiq (NW) – Activate window operation with ignition off est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Skoda Kamiq (NW)
–> Buy your OBDeleven device with VAG Custom

Skoda Kamiq NW (2019+ )

• Fade-in/out of interior lighting
• Adaptive lane guidance
• Air recirculation memory
• Burglar alarm system
• Auto CH/LH
• Automatically folding mirrors
• Automatic exit lock
• Automatic unlocking after P
• Stop lights when tailgate is open
• Central locking with IGN
• Comfort turn signals
• Activating cruise control
• Daytime running lights on/off
• Main unit daytime running light settings
• Daytime running lights deactivated by handbrake
• Fan level display in AUTO mode
• Fog lamps disabled with reverse gear
• Gauge test – Needle sweep
• Green score information screen
• Headlamp washer
• High beam assistance (MY2021 onwards)
• High beam assistance (up to MY2020)
• High beam memory
• Hill-start assist
• Hill-start assist settings
• Enhanced engine responsiveness
• Lane assist parameter memory
• Lap timer
• Locking/unlocking – Acoustic confirmation/beeper
• Rear-view mirror indicators with CH/LH
• Rear-view mirror indicators with CH/LH
• Off-road information Screen
• Oil temperature display
• Open door alarm
• Start button pulse
• Fuel quantity in instrument panel
• Seat belt warning
• Speed-dependent wipers
• Speed limiter
• Static bend lights
• Management response
• Accelerator pedal response
• TPMS in the dashboard
• Deactivate V2 traffic sign recognition
• MIB3 motion video enabled
• Virtual cockpit theme
• Closing windows after locking
• Remote Windows function
• Radio AM MIB3
• Android Auto wireless MIB3
• Automatic home fires
• Automatic headlight settings
• Battery capacity
• Battery type
• Brake check when using ACC
• Brake light test
• Brake pad warning
• Wireless CarPlay MIB3
• Type of CH light activation
• CH/LH light variant
• Comfort windows menu
• Time to return home
• Compass position on dashboard
• Correction of consumption display
• Turn signal dimming rate
• Dashboard start logo
• Digital speed on dashboard
• Door lock test
• Driver information system (DIS) display
• Driving school mode
• DRL ON with AUTO
• DRL ON with parking lights
• DRL with fog lights
• Efficiency program
• Emergency brake lights
• Motor fan test
• Engine oil type
• Front fog lights in reverse
• Left front door lock test
• Urban Joke” front Pace-Car indicators
• Right front door lock test
• Fuel system priming
• Headlight notification
• Headlamp washer test
• Basic headlight settings
• Heated seat memory
• Indicators with comfort glass
• Inspection service distance
• Inspection service interval
• Inspection service reset
• Track assistance
• Lane assist warning level
• License plate illumination with DRL
• License plate illumination with trunk open
• Flashing lock button with safety light
• Lock button color
• Low ambient temperature warning
• Multimedia restart
• Multimedia start logo
• Dashboard navigation/compass
• Oil change service distance
• Oil change service interval
• Oil service reset
• One-touch power window settings
• Optical parking system
• Pace-Car “Urban joke” indicators
• Parking aid activation tone
• Parking lights on both sides
• Phone in dashboard
• Power windows with IGN OFF
• Left rear door lock test
• Rear parking aid volume
• Rear parking aid tone
• Right rear door lock test
• Back-up light test
• Scandinavian daytime running lights
• Imminent service warning
• Klaxon still operational
• Rear lights as brake lights
• Rear lights with door open
• Third brake light when trunk is open
• Turn signal test
• Turn signals when trunk is open
• Turn signals with door open
• Turn signals with position lights
• Washer fluid indicator
• XDS interaction

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article List OBDeleven One-Click Apps KAMIQ (NW) est apparu en premier sur VAG Coding.