Purpose : to adjust the hardness of the power steering for a softer or harder steering wheel.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“44 – Direction assistée” / “44-steering assist.

4 – Click on“Adaptation – 10”.

5 – Select Channel 1 , set a value between 1 and 15 depending on your hardness preference.

Or Line 2: (If channel 1 is unavailable):

3 – Click on“Select” then click on“44 – Direction assistée” / “44-steering assist.

4 – Click on“Coding – 07”.

5 – Select :

• xxx1x for smooth steering
• xxx2x for sports management
• xxx3x for hard steering
• xxx4x for harder steering
• xxx5x for very hard steering

L’article Fabia (5J) – Modifying power steering hardness est apparu en premier sur VAG Coding.

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07” then click on “Long Coding Helper” .

5 – Select byte 1:
Then uncheck Bit 2: “Washer Fluid warning active/installed”.

L’article Fabia (5J) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

Purpose: to activate voice control on the RNS 510 (SDS).

ATTENTION: RNS 510 firmware must be version v2660.

Activating voice control brings up the “Voice control” menu in the RNS 510’s SETUP menu.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3, check the box for“Bit 1: Microphone Diagnostics active”.

Byte 7, uncheck the box for“Bit 1: Voice Control inactive”.

To install the microphone, connect the microphone lead to the rear of the RNS 510. Connect to pins (Mic-)C1 and (Mic+)C7.

L’article Fabia (5J) – Activate RNS 510 voice control est apparu en premier sur VAG Coding.

Purpose: to activate Bluetooth on the RNS 315.

ATTENTION: Not all RNS-315 are equipped with a Bluetooth module.

You can also remove the RNS 315 from its slot to check. Behind it, you’ll find a label with the RNS-315’s MAC address.
If the MAC address contains only zeros (MAC: 00:00:00:00:00:00), your RNS-315 is not equipped with the Bluetooth module.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3
Bit 5: Uncheck the “Telephone Transceiver inactive” box

L’article Fabia (5J) – Activate Bluetooth on RNS 315 est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Skoda Fabia (5J)
–> Buy your OBDeleven device with VAG Custom

Skoda Fabia 2 (5J) Facelift (2010-2014) only :

• Inspection service reset
• Oil service reset
• CD lock RNS 310/315
• RNS 310/315 developer menu
• Image OPS RNS 310/315
• RNS 310/315 SDS reversing camera
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Activate Bluetooth RNS315
• ATWS country setting
• Automatic locking/unlocking
• Automatic tailgate locking/unlocking
• Central locking
• CH/LH lights
• CH/LH variant
• Comfort flashing light
• Comfort flashing light (cycles)
• Comfort windows
• Time to return home
• Correction of consumption display
• Clutch message display
• High beam on/off DRL
• Emergency brake lights
• Fog lamps with high beam
• Front wiper operating mode/position
• Fuel system priming
• Headlamp washer
• Heating Mirrors
• Tilt sensor sensitivity
• Instrument cluster language
• Cabin monitoring
• Sensitivity of cabin monitoring
• Departure time
• Acoustic confirmation of locking/unlocking
• Mirror heating
• Parking light function
• Wiping the reverse gear
• Management response
• Teardrop wipe
• Visual confirmation
• Visual confirmation for comfort operation
• XDS activation
• Central locking with IGN
• Bending lights
• Motor fan test
• Engine oil type
• Gauge test – needle sweep
• Hill-hold assist
• Inspection service distance
• Inspection service interval
• LED license plate illumination
• Multifunction display
• Oil change service distance
• Oil change service interval
• Telephone connection tone
• Remote trunk release
• Scandinavian daytime running lights
• Seat belt warning
• Selective central locking
• Warning of impending maintenance
• Straight-line brake stabilization

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article List OBDeleven One-Click Apps FABIA (5J) est apparu en premier sur VAG Coding.

Purpose: locks/unlocks the RNS 510’s CD/DVD eject button.

Protection against theft of your navigation DVD.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program. 37 – Navigation” .

4 – Click on “Adaptation – 10”.

5 – Select Channel 43 (Ejection Lock) then set the value to 1 (CD/DVD Ejection Lock active)

Restart the RNS 510.

L’article Fabia (5J) – Lock the CD/DVD eject button on the RNS 510 est apparu en premier sur VAG Coding.

Purpose: to change the display theme of the RCD 510 and RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation” for RNS510 and “56 – Radio” for RCD510.

4 – Click on“Coding 07” then “Long Coding Helper”.

5 – Select Byte 7

Bit 4-5: Select from 3 themes
“00 Display Variant: Highline
“10 Display Variant: Sportsline
“20 Display Variant: Premium

Exit the module and save your changes. The RCD / RNS 510 must now be restarted for the changes to take effect. Press both arrows and the star for 6s.

L’article Fabia (5J) – Changing the RCD/RNS 510 theme est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS 510 navigation screen.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation”.

4 – Click on“Coding 07”. Then “Long Coding Helper”.

5 – Select Byte 7
Activate Bit 2: Speed Threshold for Destination Input active

+ use voice command to activate Bit 3: Speed Threshold for Speech Destination Input active

L’article Fabia (5J) – Speed limit display RNS 510 est apparu en premier sur VAG Coding.

Purpose: Activates the hidden menu in RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.56 – Radio” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 50 then set the value to 1

Restart the RNS 510.

To launch the Hidden Menu, press SETUP (for 6s)

L’article Fabia (5J) – Activate hidden menu RNS 510 est apparu en premier sur VAG Coding.

Purpose: Enables the display of OPS speed cameras on the car radio screen.

Please note: The vehicle must be equipped with a compatible car radio (RCD-310, RCD-510, RNS-315, RNS-510).

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“10-Station assistance”.

4 – Click on“Security Access – 16” then enter the code“71679”.

5 – Click on“Coding- 07”. then click on“Long Coding Helper”.

6 – Select Byte 0:
Bit 4: Tick “Optical illustration active”.

L’article Fabia (5J) – OPS speed camera display on car radio screen est apparu en premier sur VAG Coding.