Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“08 – Climatronic” /“08 – Auto HVAC”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“11”
Then select Bit“0-1”:“Blower display in Auto mode, enabled”.

L’article Fabia 4 (PJ) – Fan speed display on air conditioning in Auto mode est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Skoda Fabia 4 (PJ)
–> Buy your OBDeleven device with VAG Custom

Skoda Fabia 4 PJ (2021+ )

(Some ECUs may be inaccessible by SFD protection with VCDS, use OBDEleven to unlock SFD protection, and open the engine cover before coding)

• Air conditioning damper calibration
• Automatic locking/unlocking
• Automatic unlocking after P
• Central locking with IGN
• Comfort turn signals
• Comfort windows
• Bending lights
• DRL activated with AUTO
• DRL parameters in main unit
• DRL with fog lights
• DRL disabled with handbrake
• Fog lamps with high beam
• Fog lights with turn signal for passing
• Gauge test – Needle sweep
• High beam assistance memory
• Turn signals with comfort windows
• Inspection service reset
• Interior lighting discoloration
• Lane assist parameters memory
• Stopwatch
• Acoustic confirmation of locking/unlocking
• Dashboard navigation display
• Oil service reset
• Open door alarm
• Fuel quantity in instrument panel
• Scandinavian DRL
• Seat belt warning
• Management response
• MIB3 motion video enabled
• Adaptive lane guidance
• Automatic exit lock
• Battery capacity
• Battery type
• Brake light test
• Door lock test all
• Engine oil type
• Left front door lock test
• Right front door lock Test
• Headlight notification
• Headlamp washer test
• Inspection service distance
• Inspection service interval
• Track assistance
• Multimedia restart
• Oil change service distance
• Oil change service interval
• Left rear door lock test
• Right rear door lock test
• Automatic rear wiper activation
• Back-up light test
• Warning of impending maintenance
• Accelerator pedal response
• Turn signal test

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps FABIA 4 list (PJ) est apparu en premier sur VAG Coding.

Purpose: Allows you to use the key and lock the vehicle with the ignition or engine running. (Very practical with a Keyless Kessy key)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access control-Funk bei Klemme 15 ein”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Fabia 4 (PJ) – Key operation with ignition on est apparu en premier sur VAG Coding.

Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn.


Attention! There are 5 lines of coding here, see 6. (After coding, activate the option on your screen if it doesn’t work, in CAR – Open/Close settings – check Acoustic Confirmation)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung entriegeln”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Yes” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung verriegeln”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Yes” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung global”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Menuesteuerung Akustische Rueckmeldung”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Dauer der Akustischen Rueckmeldung vom Einfachhorn”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose“normal” or“kurz” (for a short signal), then confirm.


!!! If your vehicle is not equipped with the alarm, here is the coding to modify to activate the horn :


Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung Signalhorn”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

L’article Fabia 4 (PJ) – Door lock/unlock confirmation (beep/horn) est apparu en premier sur VAG Coding.

Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting)



Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.


Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Daytime running lights-Tagfahrlitch- Dauerfarlitch aktiviert zusaetzlich Standlicht”.

7 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select“active” and confirm.

L’article Fabia 4 (PJ) – Rear lights activated with daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: to add the stopwatch to the ODB/Virtual Cockpit.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper” .

5 – Select byte“1”
Then check Bit“3”:“Lap Timer active”.

L’article Fabia 4 (PJ) – Lap Timer est apparu en premier sur VAG Coding.

Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.


Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Außenlicht_uebergreifend-Fahrlichtwarnung_Hinweis_Konfig” / “driving light_hint_config”.

7 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select“kein_Hinweis” and confirm.

L’article Fabia 4 (PJ) – Deactivate “Switch on low beam” message est apparu en premier sur VAG Coding.

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Coding – 07” then“Long Coding Helper”.

5 – Select byte 0:
Bit 2-4: select “Seat Belt Warning inactive” from the drop-down list.

OR

4 – Click on“Adaptation – 10”.

5 – Click on“Security Access – 16” then enter the code“20103”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Deactivate Seat belt warning” / “ Désactiver l’avertissement de ceinture”.

7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, select“Oui” /“Yes” and confirm.

L’article Fabia 4 (PJ) – Delete belt alarm est apparu en premier sur VAG Coding.

Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Ignition active message” / ” Message ignition active. trigger “

6 – On this same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“tbd” /“No display” / “Aucun affichage” then confirm.

L’article Fabia 4 (PJ) – Deactivate open door alarm with ignition est apparu en premier sur VAG Coding.

Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next time you start up.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1 (For Camera A5 5Q0 / 3Q0) :

3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist“.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Personalization of lane dept. warning Cl. 15 on“

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“last setting ” and confirm.

Line 1 (For Camera A5 2Q0):

3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist“.

4 – Click on “Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“09”
Then check Bit 0-1“03 Configuration_for_lane_departure_warning_Kl15, Last_setting”.

L’article Fabia 4 (PJ) – Activate Lane Assist memory function est apparu en premier sur VAG Coding.