OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Skoda Citigo (1S)
–> Buy your OBDeleven device with VAG Custom

Skoda Citigo 1S (AA) (2011-2020)

• Bending lights
• Turn signal lights
• Daytime running lights
• Emergency brake lights
• Inspection service reset
• MirrorLink on the move
• Oil service reset
• Rear drip wipe
• Automatic locking/unlocking
• Brake pad wear indicator
• CH/LH lights
• CH/LH light variant
• Comfort turn signals
• Bending lights
• Turn signal lights
• Daytime running lights on/off
• DRL in MFD+
• Emergency brake lights
• Front wiper maintenance mode/position
• LED license plate lamps
• Acoustic confirmation of locking/unlocking
• Remote trunk/trunk release
• Seat belt warning
• Selective central locking
• Drip wiping
• Tire pressure warning
• Visual confirmation for comfort operation
• Washer fluid sensor
• Motor fan test
• Inspection service distance
• Inspection service interval
• Multimedia security notice
• Oil change service distance
• Oil change service interval

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps CITIGO (1S) list est apparu en premier sur VAG Coding.

Purpose: to activate the rear lights as daytime running lights (Scandinavian DRL).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect.” .

4 – Click on “Coding – 07”.

5 – Select Byte 12 :

Bit 0: Check “Daytime running lights via Tails Lights active”.

L’article Citigo (1S) – Rear daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: Allows you to add a Driving School mode view to the RCD 215 that displays turn signals, speed, etc. (also ideal for accompanied driving)


Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Channel 2”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“1” and confirm.

To activate, press the key combination “Menu -> On”.

L’article Citigo (1S) – Activate Autoschool mode (RCD 215) est apparu en premier sur VAG Coding.

Purpose: to set automatic door locking from 15km/h.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 4: Check “Auto-Lock (Automatic Locking above 15 km/h)”.

L’article Citigo (1S) – Automatic door locking est apparu en premier sur VAG Coding.

Purpose: Used to set up selective door unlocking.

When unlocking the vehicle, only the driver’s door is unlocked. To unlock all doors, press the remote control’s unlock button twice.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 0: Check “Selective Central Locking (Single Door Locking) active”.

L’article Citigo (1S) – Selective door unlocking est apparu en premier sur VAG Coding.

Purpose: to configure automatic door unlocking when the ignition key is removed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 0:
Bit 3: Check “Auto-Unlock (Unlocking when Removing the Ignition Key)”.

L’article Citigo (1S) – Automatic door unlocking est apparu en premier sur VAG Coding.

Purpose: to activate cornering lights with fog lamps when the turn signal is activated.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “ Coding – 07 ”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 21 :
Bit 2: Check “Cornering/Turn Lights via Turn Signal active”.

L’article Citigo (1S) – Corner lights (with turn signal) est apparu en premier sur VAG Coding.

Purpose: to activate cornering lights with fog lamps.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “ Coding – 07 ”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 12 :
Bit 6: Check “Turn/Cornering Lights installed/active”.

L’article Citigo (1S) – Corner lights est apparu en premier sur VAG Coding.

Purpose: to change the number of flashes after activating the comfort indicators.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “ Adaptation – 10 ”.

5 – Select Channel 43 (Lights: Comfort Turn Signals (Cycles) from the drop-down list)

Choose a value between 1 and 5

L’article Citigo (1S) – Change number of flashes (comfort flashers) est apparu en premier sur VAG Coding.

Purpose: to activate the daytime running lights (DRL).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 23:
Bit 6 : Check Function “Daytime Running Light (DRL)” active

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 12 :
Bit 1: Tick “Daytime Running Light (DRL) adjustable (Manually AND/OR instrument Cluster)”.

L’article Citigo (1S) – Daytime running light activation (DRL) est apparu en premier sur VAG Coding.