<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Liste Codages Options Cachées Seat / Cupra - VAG Coding</title>
	<atom:link href="https://www.vag-coding.net/category/seat-cupra/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.vag-coding.net/category/seat-cupra/</link>
	<description>Codage Personnalisation et Activation d&#039;Options Cachées VCDS VAG-COM OBDeleven VCP Tuto Codes Défauts Sécurisé CarPlay VW AUDI SEAT SKODA</description>
	<lastBuildDate>Fri, 13 Nov 2026 15:34:42 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://www.vag-coding.net/wp-content/uploads/2022/12/cropped-cropped-990A929D-545E-4694-833C-F67C340B13FC-e1672418802812-150x150.jpeg</url>
	<title>Liste Codages Options Cachées Seat / Cupra - VAG Coding</title>
	<link>https://www.vag-coding.net/category/seat-cupra/</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">211573443</site>	<item>
		<title>Toledo (NH) &#8211; Fan speed display for air conditioning in Auto mode</title>
		<link>https://www.vag-coding.net/seat-cupra/toledo-nh/toledo-nh-fan-speed-display-for-air-conditioning-in-auto-mode/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Fri, 13 Nov 2026 08:55:16 +0000</pubDate>
				<category><![CDATA[Toledo (NH)]]></category>
		<category><![CDATA[Air conditioning]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/toledo-nh/toledo-nh-fan-speed-display-for-air-conditioning-in-auto-mode/</guid>

					<description><![CDATA[<p>Function: Displays the fan speed when automatic climate control mode is activated. (Climatronic fan speed display, Auto mode) (2015 and later) Proceed : 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/toledo-nh/toledo-nh-fan-speed-display-for-air-conditioning-in-auto-mode/">Toledo (NH) &#8211; Fan speed display for air conditioning in Auto mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img fetchpriority="high" decoding="async" width="430" height="322" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/seat_toledo_nh.png" alt="VAG Coding VCDS ODBeleven Seat Toledo NH" class="wp-image-4954" style="object-fit:cover" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/seat_toledo_nh.png 430w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_toledo_nh-300x225.png 300w" sizes="(max-width: 430px) 100vw, 430px" /></figure>

<p class="wp-block-paragraph"><strong>Function:</strong> Displays the fan speed when automatic climate control mode is activated. (Climatronic fan speed display, Auto mode) (2015 and later)<br/><br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>&#8221; then click &#8220;<strong>08 &#8211; Climatronic</strong>&#8221; (or &#8220;<strong>08 &#8211; Auto HVAC</strong>,&#8221; depending on your VCDS version) <br/><br/><strong>4</strong> &#8211; Click on &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click on &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>08</strong>&#8220;<br/>Then check bit &#8220;<strong>0</strong>&#8220;: &#8220;<strong>Blower Display in Auto Operation active</strong>&#8220;<br/></p>

<figure class="wp-block-image size-full"><img decoding="async" width="1273" height="597" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/IMG_4256.jpeg" alt="" class="wp-image-59392" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/IMG_4256.jpeg 1273w, https://www.vag-coding.net/wp-content/uploads/2026/11/IMG_4256-300x141.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/IMG_4256-1024x480.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/IMG_4256-768x360.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/IMG_4256-600x281.jpeg 600w" sizes="(max-width: 1273px) 100vw, 1273px" /></figure>

<figure class="wp-block-image size-full"><img decoding="async" width="640" height="320" src="https://www.vag-coding.fr/wp-content/uploads/2024/12/affichageclimautomqb.webp" alt="" class="wp-image-27914" srcset="https://www.vag-coding.net/wp-content/uploads/2024/12/affichageclimautomqb.webp 640w, https://www.vag-coding.net/wp-content/uploads/2024/12/affichageclimautomqb-300x150.webp 300w, https://www.vag-coding.net/wp-content/uploads/2024/12/affichageclimautomqb-600x300.webp 600w" sizes="(max-width: 640px) 100vw, 640px" /></figure>

<p class="wp-block-paragraph"></p>
<button class="simplefavorite-button has-count preset" data-postid="59417" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/toledo-nh/toledo-nh-fan-speed-display-for-air-conditioning-in-auto-mode/">Toledo (NH) &#8211; Fan speed display for air conditioning in Auto mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">59417</post-id>	</item>
		<item>
		<title>Leon (5F) &#8211; Enable Park Assist guide lines</title>
		<link>https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-enable-park-assist-guide-lines/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Tue, 10 Nov 2026 12:36:49 +0000</pubDate>
				<category><![CDATA[Leon (5F)]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<category><![CDATA[Parking Assistance]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/leon-5f/leon-5f-enable-park-assist-guide-lines/</guid>

					<description><![CDATA[<p>Purpose: Displays guide lines on the Park Assist Easy Connect MIB2 screen to show the vehicle&#8217;s path during parking maneuvers. Proceed : 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-enable-park-assist-guide-lines/">Leon (5F) &#8211; Enable Park Assist guide lines</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="887" height="665" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/seat_leon_5f.jpg" alt="VAG Coding VCDS ODBeleven Seat Leon 3 5F" class="wp-image-2641" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f.jpg 887w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-768x576.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-600x450.jpg 600w" sizes="auto, (max-width: 887px) 100vw, 887px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Displays guide lines on the Park Assist Easy Connect MIB2 screen to show the vehicle&#8217;s path during parking maneuvers. <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> – Click “ <strong>Select</strong>,” then click “ <strong>10 &#8211; Parking Assistance</strong>.”</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>71679</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click on &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>6</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check bit &#8220;<strong>5</strong>&#8220;: &#8220;<strong>Vehicle Path Display active/enabled</strong>&#8220;<br/></p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="479" height="262" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/ligneparkassist.jpg" alt="" class="wp-image-59005" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/ligneparkassist.jpg 479w, https://www.vag-coding.net/wp-content/uploads/2026/11/ligneparkassist-300x164.jpg 300w" sizes="auto, (max-width: 479px) 100vw, 479px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="59023" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-enable-park-assist-guide-lines/">Leon (5F) &#8211; Enable Park Assist guide lines</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">59023</post-id>	</item>
		<item>
		<title>Tarraco (KN) &#8211; Activate Off-Road Mode</title>
		<link>https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-activate-off-road-mode/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 20:49:42 +0000</pubDate>
				<category><![CDATA[Tarraco (KN)]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<category><![CDATA[Off-Road]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/tarraco-kn/tarraco-kn-enable-off-road-mode/</guid>

					<description><![CDATA[<p>Purpose: Allows you to add the Offroad Information screen to the MIB2 Easy Connect with navigation. To display Offroad: CAR -&#62; Views -&#62; Offroad Warning!! There are 3 lines of code to enter here. Procedure: 1 &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-activate-off-road-mode/">Tarraco (KN) &#8211; Activate Off-Road Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="850" height="482" src="https://www.vag-coding.fr/wp-content/uploads/2023/01/seat-tarraco-kn.png" alt="VAG Coding VCDS ODBeleven Seat Tarraco KN" class="wp-image-6245" srcset="https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn.png 850w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-300x170.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-768x436.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-600x340.png 600w" sizes="auto, (max-width: 850px) 100vw, 850px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to add the Offroad Information screen to the MIB2 Easy Connect with navigation. To display Offroad: CAR -&gt; Views -&gt; Offroad <br/><br/><br/><strong>Warning!! There are 3 lines of code to enter here.</strong> <br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F &#8211; Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click &#8220;<strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose<strong>&#8220;Car_Function_List_BAP_Gen2-compass_0x15</strong>&#8220;.<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>of the page.<br/>From this menu, select &#8220;<strong>active</strong>&#8221; and then confirm.<br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F &#8211; Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click &#8220;<strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose<strong>&#8220;Car_Function_Adaptations_Gen2-menu_display_Compass</strong>&#8220;.<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>of the page.<br/>From this menu, select &#8220;<strong>active</strong>&#8221; and then confirm.<br/><br/><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F &#8211; Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click &#8220;<strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose<strong>&#8220;Car_Function_Adaptations_Gen2-menu_display_Compass_over-threshold_high</strong>&#8220;.<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>of the page.<br/>From this menu, select &#8220;<strong>active</strong>&#8221; and then confirm.</p>

<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<div class="video-container"><iframe loading="lazy" title="Activer le Mode Offroad avec VCDS / OBDeleven | VAG Coding" width="520" height="293" src="https://www.youtube.com/embed/0qmhS2gh1Zs?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></div>
</div></figure>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="800" height="480" src="https://www.vag-coding.fr/wp-content/uploads/2023/08/offroad-menu-seat-leon-vcds-obdeleven-coding.jpg" alt="" class="wp-image-10820" srcset="https://www.vag-coding.net/wp-content/uploads/2023/08/offroad-menu-seat-leon-vcds-obdeleven-coding.jpg 800w, https://www.vag-coding.net/wp-content/uploads/2023/08/offroad-menu-seat-leon-vcds-obdeleven-coding-300x180.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2023/08/offroad-menu-seat-leon-vcds-obdeleven-coding-768x461.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2023/08/offroad-menu-seat-leon-vcds-obdeleven-coding-600x360.jpg 600w" sizes="auto, (max-width: 800px) 100vw, 800px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="58859" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-activate-off-road-mode/">Tarraco (KN) &#8211; Activate Off-Road Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58859</post-id>	</item>
		<item>
		<title>Leon (5F) &#8211; Enable WLAN for Navi System Plus MIB1</title>
		<link>https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-enable-wlan-for-navi-system-plus-mib1/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 14:41:56 +0000</pubDate>
				<category><![CDATA[Leon (5F)]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/leon-5f/leon-5f-enable-wlan-for-navi-system-plus-mib1/</guid>

					<description><![CDATA[<p>Purpose: Allows you to share the connection received by the car from a phone or a 4G dongle via a hotspot. For Navi System Plus V1 MIB1 with firmware version MHIG only. Warning!! There are 4 lines of code to enter here. Procedure: 1 &#8211; With the engine off and the ignition off, connect your&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-enable-wlan-for-navi-system-plus-mib1/">Leon (5F) &#8211; Enable WLAN for Navi System Plus MIB1</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="887" height="665" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/seat_leon_5f.jpg" alt="VAG Coding VCDS ODBeleven Seat Leon 3 5F" class="wp-image-2641" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f.jpg 887w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-768x576.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-600x450.jpg 600w" sizes="auto, (max-width: 887px) 100vw, 887px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to share the connection received by the car from a phone or a 4G dongle via a hotspot. For Navi System Plus V1 MIB1 with firmware version MHIG only. <br/><br/><br/><strong>Warning!! There are 4 lines of code to enter here.</strong> <br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; On this page, at the top, there is a drop-down menu.<br/>In this drop-down menu, choose<strong>“WLAN</strong>”.<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the value<strong>“ON”</strong>.<br/><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Adaptation &#8211; 10</strong>&#8220;<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Vehicle Configuration &#8211; Wi-Fi Hotspot</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the value<strong>“ON”</strong>.<br/><br/><br/><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose<strong>“Vehicle configuration-UPnP</strong>”.<br/><br/><strong>7</strong>  &#8211; On this same page, there is a second drop-down menu, but it&#8217;s further down<br/>on the page.<br/>On the latter, select the value &#8221; <strong>ON</strong> &#8220;<br/><br/><br/><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on &#8221; <strong>Select</strong> &#8221; then click on &#8221; <strong>5F – Information Electr.</strong> &#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding- 07</strong> &#8221; then click on &#8220;&#8221;<strong>Long Encoding Assistant</strong>&#8220;<br/><br/><strong>5 &#8211;</strong> Select byte &#8220;<strong>15</strong>&#8220;<br/>Then check bit &#8220;<strong>4</strong>&#8220;<br/><br/><strong>6 &#8211;</strong> Select byte &#8220;<strong>24</strong>&#8220;<br/>Then check bit &#8220;<strong>3</strong>&#8220;</p>
<button class="simplefavorite-button has-count preset" data-postid="58659" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-enable-wlan-for-navi-system-plus-mib1/">Leon (5F) &#8211; Enable WLAN for Navi System Plus MIB1</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58659</post-id>	</item>
		<item>
		<title>Tarraco (KN) &#8211; Disable Sailing Mode</title>
		<link>https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-disable-sailing-mode/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Wed, 04 Nov 2026 19:20:10 +0000</pubDate>
				<category><![CDATA[Tarraco (KN)]]></category>
		<category><![CDATA[DSG]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/tarraco-kn/tarraco-kn-disable-sailing-mode/</guid>

					<description><![CDATA[<p>Purpose: Allows you to disable freewheel mode (Sailing / Freilauf) on vehicles equipped with a DSG transmission. This coding allows you to modify the control of the freewheel function, which disengages the engine from the transmission during deceleration to reduce fuel consumption. Procedure: 1 &#8211; With the engine off and the ignition off, connect your&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-disable-sailing-mode/">Tarraco (KN) &#8211; Disable Sailing Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="850" height="482" src="https://www.vag-coding.fr/wp-content/uploads/2023/01/seat-tarraco-kn.png" alt="VAG Coding VCDS ODBeleven Seat Tarraco KN" class="wp-image-6245" srcset="https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn.png 850w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-300x170.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-768x436.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-600x340.png 600w" sizes="auto, (max-width: 850px) 100vw, 850px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to disable freewheel mode (Sailing / Freilauf) on vehicles equipped with a DSG transmission. This coding allows you to modify the control of the freewheel function, which disengages the engine from the transmission during deceleration to reduce fuel consumption. </p>

<p class="wp-block-paragraph"><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; Gateway</strong>&#8220;.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>09</strong></p>

<p class="wp-block-paragraph"><span class="">Disable bit <strong>4</strong></span> <span class=""><strong>&#8220;FPA_Funktion_Freilauf_DefaultON&#8221;</strong></span></p>

<div class="wp-block-jetpack-slideshow aligncenter" data-effect="slide" style="--aspect-ratio:calc(1915 / 964)"><div class="wp-block-jetpack-slideshow_container swiper"><ul class="wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper"><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1915" height="964" alt="" class="wp-block-jetpack-slideshow_image wp-image-58506" data-id="58506" data-aspect-ratio="1915 / 964" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre2.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2.jpeg 1915w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-300x151.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-1024x515.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-768x387.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-1536x773.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-600x302.jpeg 600w" sizes="(max-width: 1915px) 100vw, 1915px" /></figure></li><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1179" height="827" alt="" class="wp-block-jetpack-slideshow_image wp-image-58508" data-id="58508" data-aspect-ratio="1179 / 827" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/freilaufobdeleven.png" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven.png 1179w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-300x210.png 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-1024x718.png 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-768x539.png 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-600x421.png 600w" sizes="(max-width: 1179px) 100vw, 1179px" /></figure></li></ul><a class="wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white" role="button"></a><a class="wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white" role="button"></a><a aria-label="Pause Slideshow" class="wp-block-jetpack-slideshow_button-pause" role="button"></a><div class="wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white"></div></div></div>

<p class="wp-block-paragraph"><strong>Line 2:</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; Gateway</strong>&#8220;.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>12</strong></p>

<p class="wp-block-paragraph"><span class="">Set bit <strong>2</strong> to</span> 0 <span class=""><strong>&#8220;FPA_Function_Free-Wheel&#8221;</strong></span> / <strong>&#8220;Drive Program Function &#8216;Free Wheel/Clutch&#8217; active&#8221;</strong></p>

<div class="wp-block-jetpack-slideshow aligncenter" data-effect="slide" style="--aspect-ratio:calc(1952 / 982)"><div class="wp-block-jetpack-slideshow_container swiper"><ul class="wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper"><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1952" height="982" alt="" class="wp-block-jetpack-slideshow_image wp-image-58505" data-id="58505" data-aspect-ratio="1952 / 982" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre1.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1.jpeg 1952w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-300x151.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-1024x515.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-768x386.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-1536x773.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-600x302.jpeg 600w" sizes="(max-width: 1952px) 100vw, 1952px" /></figure></li><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1990" height="988" alt="" class="wp-block-jetpack-slideshow_image wp-image-58507" data-id="58507" data-aspect-ratio="1990 / 988" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre3.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3.jpeg 1990w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-300x149.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-1024x508.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-768x381.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-1536x763.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-600x298.jpeg 600w" sizes="(max-width: 1990px) 100vw, 1990px" /></figure></li></ul><a class="wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white" role="button"></a><a class="wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white" role="button"></a><a aria-label="Pause Slideshow" class="wp-block-jetpack-slideshow_button-pause" role="button"></a><div class="wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white"></div></div></div>

<p class="wp-block-paragraph"><strong>Line 3 (if you have Front Assist):</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>13 &#8211; Distance Control</strong>.&#8221;</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>11</strong></p>

<p class="wp-block-paragraph">Select bits <strong>6-7</strong> <strong>&#8220;Sailing_function &#8211; not active&#8221;</strong><br/>OBDeleven: &#8220;Sailing_function&#8221; &#8220;no_predictive_sailing&#8221;</p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="449" height="234" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/sailing.png" alt="" class="wp-image-58503" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/sailing.png 449w, https://www.vag-coding.net/wp-content/uploads/2026/11/sailing-300x156.png 300w" sizes="auto, (max-width: 449px) 100vw, 449px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="58587" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-disable-sailing-mode/">Tarraco (KN) &#8211; Disable Sailing Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58587</post-id>	</item>
		<item>
		<title>Ateca (5F) &#8211; Disable Sailing Mode</title>
		<link>https://www.vag-coding.net/seat-cupra/ateca-5f/ateca-5f-disable-sailing-mode/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Wed, 04 Nov 2026 19:02:29 +0000</pubDate>
				<category><![CDATA[Ateca (5F)]]></category>
		<category><![CDATA[DSG]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/ateca-5f/ateca-5f-disable-sailing-mode/</guid>

					<description><![CDATA[<p>Purpose: Allows you to disable freewheel mode (Sailing / Freilauf) on vehicles equipped with a DSG transmission. This coding allows you to modify the control of the freewheel function, which disengages the engine from the transmission during deceleration to reduce fuel consumption. Procedure: 1 &#8211; With the engine off and the ignition off, connect your&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/ateca-5f/ateca-5f-disable-sailing-mode/">Ateca (5F) &#8211; Disable Sailing Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/SEAT-ATECA.png" alt="VAG Coding VCDS ODBeleven Seat Ateca 5F" class="wp-image-1874" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA.png 1200w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to disable freewheel mode (Sailing / Freilauf) on vehicles equipped with a DSG transmission. This coding allows you to modify the control of the freewheel function, which disengages the engine from the transmission during deceleration to reduce fuel consumption. </p>

<p class="wp-block-paragraph"><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; Gateway</strong>&#8220;.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>09</strong></p>

<p class="wp-block-paragraph"><span class="">Disable bit <strong>4</strong></span> <span class=""><strong>&#8220;FPA_Funktion_Freilauf_DefaultON&#8221;</strong></span></p>

<div class="wp-block-jetpack-slideshow aligncenter" data-effect="slide" style="--aspect-ratio:calc(1915 / 964)"><div class="wp-block-jetpack-slideshow_container swiper"><ul class="wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper"><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1915" height="964" alt="" class="wp-block-jetpack-slideshow_image wp-image-58506" data-id="58506" data-aspect-ratio="1915 / 964" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre2.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2.jpeg 1915w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-300x151.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-1024x515.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-768x387.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-1536x773.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-600x302.jpeg 600w" sizes="(max-width: 1915px) 100vw, 1915px" /></figure></li><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1179" height="827" alt="" class="wp-block-jetpack-slideshow_image wp-image-58508" data-id="58508" data-aspect-ratio="1179 / 827" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/freilaufobdeleven.png" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven.png 1179w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-300x210.png 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-1024x718.png 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-768x539.png 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-600x421.png 600w" sizes="(max-width: 1179px) 100vw, 1179px" /></figure></li></ul><a class="wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white" role="button"></a><a class="wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white" role="button"></a><a aria-label="Pause Slideshow" class="wp-block-jetpack-slideshow_button-pause" role="button"></a><div class="wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white"></div></div></div>

<p class="wp-block-paragraph"><strong>Line 2:</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; Gateway</strong>&#8220;.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>12</strong></p>

<p class="wp-block-paragraph"><span class="">Set bit <strong>2</strong> to</span> 0 <span class=""><strong>&#8220;FPA_Function_Free-Wheel&#8221;</strong></span> / <strong>&#8220;Drive Program Function &#8216;Free Wheel/Clutch&#8217; active&#8221;</strong></p>

<div class="wp-block-jetpack-slideshow aligncenter" data-effect="slide" style="--aspect-ratio:calc(1952 / 982)"><div class="wp-block-jetpack-slideshow_container swiper"><ul class="wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper"><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1952" height="982" alt="" class="wp-block-jetpack-slideshow_image wp-image-58505" data-id="58505" data-aspect-ratio="1952 / 982" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre1.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1.jpeg 1952w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-300x151.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-1024x515.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-768x386.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-1536x773.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-600x302.jpeg 600w" sizes="(max-width: 1952px) 100vw, 1952px" /></figure></li><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1990" height="988" alt="" class="wp-block-jetpack-slideshow_image wp-image-58507" data-id="58507" data-aspect-ratio="1990 / 988" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre3.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3.jpeg 1990w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-300x149.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-1024x508.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-768x381.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-1536x763.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-600x298.jpeg 600w" sizes="(max-width: 1990px) 100vw, 1990px" /></figure></li></ul><a class="wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white" role="button"></a><a class="wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white" role="button"></a><a aria-label="Pause Slideshow" class="wp-block-jetpack-slideshow_button-pause" role="button"></a><div class="wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white"></div></div></div>

<p class="wp-block-paragraph"><strong>Line 3 (if you have Front Assist):</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>13 &#8211; Distance Control</strong>.&#8221;</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>11</strong></p>

<p class="wp-block-paragraph">Select bits <strong>6-7</strong> <strong>&#8220;Sailing_function &#8211; not active&#8221;</strong><br/>OBDeleven: &#8220;Sailing_function&#8221; &#8220;no_predictive_sailing&#8221;</p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="449" height="234" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/sailing.png" alt="" class="wp-image-58503" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/sailing.png 449w, https://www.vag-coding.net/wp-content/uploads/2026/11/sailing-300x156.png 300w" sizes="auto, (max-width: 449px) 100vw, 449px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="58565" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/ateca-5f/ateca-5f-disable-sailing-mode/">Ateca (5F) &#8211; Disable Sailing Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58565</post-id>	</item>
		<item>
		<title>Leon (5F) &#8211; Disable Sailing Mode</title>
		<link>https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-disable-sailing-mode/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Wed, 04 Nov 2026 19:01:58 +0000</pubDate>
				<category><![CDATA[Leon (5F)]]></category>
		<category><![CDATA[DSG]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/leon-5f/leon-5f-disable-sailing-mode/</guid>

					<description><![CDATA[<p>Purpose: Allows you to disable freewheel mode (Sailing / Freilauf) on vehicles equipped with a DSG transmission. This coding allows you to modify the control of the freewheel function, which disengages the engine from the transmission during deceleration to reduce fuel consumption. Procedure: 1 &#8211; With the engine off and the ignition off, connect your&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-disable-sailing-mode/">Leon (5F) &#8211; Disable Sailing Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="887" height="665" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/seat_leon_5f.jpg" alt="VAG Coding VCDS ODBeleven Seat Leon 3 5F" class="wp-image-2641" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f.jpg 887w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-768x576.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_5f-600x450.jpg 600w" sizes="auto, (max-width: 887px) 100vw, 887px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to disable freewheel mode (Sailing / Freilauf) on vehicles equipped with a DSG transmission. This coding allows you to modify the control of the freewheel function, which disengages the engine from the transmission during deceleration to reduce fuel consumption. </p>

<p class="wp-block-paragraph"><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; Gateway</strong>&#8220;.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>09</strong></p>

<p class="wp-block-paragraph"><span class="">Disable bit <strong>4</strong></span> <span class=""><strong>&#8220;FPA_Funktion_Freilauf_DefaultON&#8221;</strong></span></p>

<div class="wp-block-jetpack-slideshow aligncenter" data-effect="slide" style="--aspect-ratio:calc(1915 / 964)"><div class="wp-block-jetpack-slideshow_container swiper"><ul class="wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper"><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1915" height="964" alt="" class="wp-block-jetpack-slideshow_image wp-image-58506" data-id="58506" data-aspect-ratio="1915 / 964" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre2.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2.jpeg 1915w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-300x151.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-1024x515.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-768x387.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-1536x773.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre2-600x302.jpeg 600w" sizes="(max-width: 1915px) 100vw, 1915px" /></figure></li><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1179" height="827" alt="" class="wp-block-jetpack-slideshow_image wp-image-58508" data-id="58508" data-aspect-ratio="1179 / 827" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/freilaufobdeleven.png" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven.png 1179w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-300x210.png 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-1024x718.png 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-768x539.png 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/freilaufobdeleven-600x421.png 600w" sizes="(max-width: 1179px) 100vw, 1179px" /></figure></li></ul><a class="wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white" role="button"></a><a class="wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white" role="button"></a><a aria-label="Pause Slideshow" class="wp-block-jetpack-slideshow_button-pause" role="button"></a><div class="wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white"></div></div></div>

<p class="wp-block-paragraph"><strong>Line 2:</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; Gateway</strong>&#8220;.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>12</strong></p>

<p class="wp-block-paragraph"><span class="">Set bit <strong>2</strong> to</span> 0 <span class=""><strong>&#8220;FPA_Function_Free-Wheel&#8221;</strong></span> / <strong>&#8220;Drive Program Function &#8216;Free Wheel/Clutch&#8217; active&#8221;</strong></p>

<div class="wp-block-jetpack-slideshow aligncenter" data-effect="slide" style="--aspect-ratio:calc(1952 / 982)"><div class="wp-block-jetpack-slideshow_container swiper"><ul class="wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper"><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1952" height="982" alt="" class="wp-block-jetpack-slideshow_image wp-image-58505" data-id="58505" data-aspect-ratio="1952 / 982" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre1.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1.jpeg 1952w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-300x151.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-1024x515.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-768x386.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-1536x773.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre1-600x302.jpeg 600w" sizes="(max-width: 1952px) 100vw, 1952px" /></figure></li><li class="wp-block-jetpack-slideshow_slide swiper-slide"><figure><img loading="lazy" decoding="async" width="1990" height="988" alt="" class="wp-block-jetpack-slideshow_image wp-image-58507" data-id="58507" data-aspect-ratio="1990 / 988" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/rouelibre3.jpeg" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3.jpeg 1990w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-300x149.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-1024x508.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-768x381.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-1536x763.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/11/rouelibre3-600x298.jpeg 600w" sizes="(max-width: 1990px) 100vw, 1990px" /></figure></li></ul><a class="wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white" role="button"></a><a class="wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white" role="button"></a><a aria-label="Pause Slideshow" class="wp-block-jetpack-slideshow_button-pause" role="button"></a><div class="wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white"></div></div></div>

<p class="wp-block-paragraph"><strong>Line 3 (if you have Front Assist):</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>13 &#8211; Distance Control</strong>.&#8221;</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Select Byte <strong>11</strong></p>

<p class="wp-block-paragraph">Select bits <strong>6-7</strong> <strong>&#8220;Sailing_function &#8211; not active&#8221;</strong><br/>OBDeleven: &#8220;Sailing_function&#8221; &#8220;no_predictive_sailing&#8221;</p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="449" height="234" src="https://www.vag-coding.fr/wp-content/uploads/2026/11/sailing.png" alt="" class="wp-image-58503" srcset="https://www.vag-coding.net/wp-content/uploads/2026/11/sailing.png 449w, https://www.vag-coding.net/wp-content/uploads/2026/11/sailing-300x156.png 300w" sizes="auto, (max-width: 449px) 100vw, 449px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="58574" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-5f/leon-5f-disable-sailing-mode/">Leon (5F) &#8211; Disable Sailing Mode</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58574</post-id>	</item>
		<item>
		<title>Leon (1P) Facelift &#8211; Adjusting the brake assist</title>
		<link>https://www.vag-coding.net/seat-cupra/leon-1p/leon-1p-facelift-adjusting-the-brake-assist/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 29 Oct 2026 16:21:02 +0000</pubDate>
				<category><![CDATA[Leon (1P)]]></category>
		<category><![CDATA[Braking]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/leon-1p/leon-1p-facelift-adjusting-the-brake-assist/</guid>

					<description><![CDATA[<p>Purpose : to configure brake assist. Procedure : 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program. Line 1 : 3 &#8211; Click on“Select”, then click on“03 &#8211;&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-1p/leon-1p-facelift-adjusting-the-brake-assist/">Leon (1P) Facelift &#8211; Adjusting the brake assist</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="717" height="537" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/seat_leon_1p_facelift.jpg" alt="VAG Coding VCDS OBD for Seat Leon 1P facelift" class="wp-image-1442" style="object-fit:cover" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_1p_facelift.jpg 717w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_1p_facelift-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/seat_leon_1p_facelift-600x449.jpg 600w" sizes="auto, (max-width: 717px) 100vw, 717px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose </strong>: to configure brake assist. </p>

<p class="wp-block-paragraph"><strong>Procedure </strong>: <br/>1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/>2 &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1 :</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>“Select”</strong>, then click on<strong>“03 &#8211; ABS</strong>”.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click &#8220;<strong>Adaptation – 10</strong>.&#8221;</p>

<p class="wp-block-paragraph"><strong>5 &#8211; </strong>Select Channel <strong>09</strong> (Brake Assist from the drop-down list)</p>

<p class="wp-block-paragraph"><em>Choose a value</em><br/> <em>0 &#8220;medium&#8221;</em><br/> 1 &#8220;low&#8221; (with low assistance, the brake pedal will be harder and you will have to press harder to brake)<br/> 2 &#8220;strong&#8221; (with strong assistance, the brake pedal will be softer and less pressure will be required to brake)</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="627" height="360" src="https://www.vag-coding.fr/wp-content/uploads/2024/07/assistfreing6.jpg" alt="" class="wp-image-22506" srcset="https://www.vag-coding.net/wp-content/uploads/2024/07/assistfreing6.jpg 627w, https://www.vag-coding.net/wp-content/uploads/2024/07/assistfreing6-300x172.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2024/07/assistfreing6-600x344.jpg 600w" sizes="auto, (max-width: 627px) 100vw, 627px" /></figure>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"></p>
<button class="simplefavorite-button has-count preset" data-postid="58336" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-1p/leon-1p-facelift-adjusting-the-brake-assist/">Leon (1P) Facelift &#8211; Adjusting the brake assist</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58336</post-id>	</item>
		<item>
		<title>Tarraco (KN) &#8211; Change the vehicle image in MIB2</title>
		<link>https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-change-the-vehicle-image-in-mib2/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Wed, 28 Oct 2026 19:44:27 +0000</pubDate>
				<category><![CDATA[Tarraco (KN)]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/tarraco-kn/tarraco-kn-change-the-vehicle-image-in-mib2/</guid>

					<description><![CDATA[<p>Purpose: Allows you to change the vehicle image displayed on the Seat Media Navi System MIB2 multimedia screen, which is useful after a retrofit to ensure it matches the actual vehicle variant. The 5F control unit allows you to configure the vehicle’s make, model, generation, variant, and variant code. Once these values are entered correctly,&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-change-the-vehicle-image-in-mib2/">Tarraco (KN) &#8211; Change the vehicle image in MIB2</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="850" height="482" src="https://www.vag-coding.fr/wp-content/uploads/2023/01/seat-tarraco-kn.png" alt="VAG Coding VCDS ODBeleven Seat Tarraco KN" class="wp-image-6245" srcset="https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn.png 850w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-300x170.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-768x436.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/01/seat-tarraco-kn-600x340.png 600w" sizes="auto, (max-width: 850px) 100vw, 850px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to change the vehicle image displayed on the Seat Media Navi System MIB2 multimedia screen, which is useful after a retrofit to ensure it matches the actual vehicle variant.</p>

<p class="wp-block-paragraph">The 5F control unit allows you to configure the vehicle’s make, model, generation, variant, and variant code. Once these values are entered correctly, the corresponding image appears on the screen.</p>

<p class="wp-block-paragraph">These settings also affect the vehicle’s display on the onboard computer, the Climatronic menu, the balance and sound distribution settings, the ambient lighting, the parking assist and rearview camera, as well as other functions displayed on the multimedia system’s screen.<br/><br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click on &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>6</strong> &#8211; Replace the byte values &#8220;<strong>00, 01, 02</strong>&#8221; with the list of coding options for the Seat vehicle&#8217;s model, generation, variant, and trim level.<br/></p>

<ul class="wp-block-list">
<li>04 24 08 &#8211; Seat Alhambra</li>



<li>04 23 06 &#8211; Seat Ateca</li>



<li>04 23 86 &#8211; Seat Ateca Xcellence</li>



<li>04 72 00 &#8211; Seat Ibiza</li>



<li>04 52 00 &#8211; Seat Ibiza</li>



<li>04 52 04 &#8211; Seat Ibiza FR</li>



<li>04 52 10 &#8211; Seat Ibiza Cupra</li>



<li>04 73 00 &#8211; Seat Leon 3 (5F) Stylance</li>



<li>04 73 02 &#8211; Seat Leon 3 (5F) Kombi Cupra</li>



<li>04 73 03 &#8211; Seat Leon 3 (5F) Kombi</li>



<li>04 73 60 &#8211; Seat Leon 3 (5F) FR</li>



<li>04 73 80 &#8211; Seat Leon 3 (5F) facelift Hatchback</li>



<li>04 73 82 &#8211; Seat Leon 3 (5F) facelift Kombi</li>



<li>04 23 16 &#8211; Seat Tarraco Xcellence</li>



<li>04 52 01 &#8211; Seat Toledo</li>



<li>04 53 01 &#8211; Seat Toledo</li>



<li>04 12 06 &#8211; Seat Arona</li>
</ul>

<p class="wp-block-paragraph">Example for a Golf 7.5 Phase 2 (see photo):</p>

<p class="wp-block-paragraph">Byte 00: <strong>02</strong> / Byte 01: <strong>73</strong> / Byte 02: <strong>10</strong>  </p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="453" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/mib2car-1024x453.jpeg" alt="" class="wp-image-58127" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-1024x453.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-300x133.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-768x340.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-1536x680.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-2048x907.jpeg 2048w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-600x266.jpeg 600w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="58277" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/tarraco-kn/tarraco-kn-change-the-vehicle-image-in-mib2/">Tarraco (KN) &#8211; Change the vehicle image in MIB2</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58277</post-id>	</item>
		<item>
		<title>Arona (KJ) &#8211; Change the vehicle image in MIB2</title>
		<link>https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-change-the-vehicle-image-in-mib2/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Wed, 28 Oct 2026 19:43:54 +0000</pubDate>
				<category><![CDATA[Arona (KJ)]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/arona-kj/arona-kj-change-the-vehicle-image-in-mib2/</guid>

					<description><![CDATA[<p>Purpose: Allows you to change the vehicle image displayed on the Seat Media Navi System MIB2 multimedia screen, which is useful after a retrofit to ensure it matches the actual vehicle variant. The 5F control unit allows you to configure the vehicle’s make, model, generation, variant, and variant code. Once these values are entered correctly,&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-change-the-vehicle-image-in-mib2/">Arona (KJ) &#8211; Change the vehicle image in MIB2</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/SEAT-ARONA-KJ.png" alt="VAG Coding VCDS ODBeleven Seat Arona KJ" class="wp-image-5068" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ.png 1200w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to change the vehicle image displayed on the Seat Media Navi System MIB2 multimedia screen, which is useful after a retrofit to ensure it matches the actual vehicle variant.</p>

<p class="wp-block-paragraph">The 5F control unit allows you to configure the vehicle’s make, model, generation, variant, and variant code. Once these values are entered correctly, the corresponding image appears on the screen.</p>

<p class="wp-block-paragraph">These settings also affect the vehicle’s display on the onboard computer, the Climatronic menu, the balance and sound distribution settings, the ambient lighting, the parking assist and rearview camera, as well as other functions displayed on the multimedia system’s screen.<br/><br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click on &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>6</strong> &#8211; Replace the byte values &#8220;<strong>00, 01, 02</strong>&#8221; with the list of coding options for the Seat vehicle&#8217;s model, generation, variant, and trim level.<br/></p>

<ul class="wp-block-list">
<li>04 24 08 &#8211; Seat Alhambra</li>



<li>04 23 06 &#8211; Seat Ateca</li>



<li>04 23 86 &#8211; Seat Ateca Xcellence</li>



<li>04 72 00 &#8211; Seat Ibiza</li>



<li>04 52 00 &#8211; Seat Ibiza</li>



<li>04 52 04 &#8211; Seat Ibiza FR</li>



<li>04 52 10 &#8211; Seat Ibiza Cupra</li>



<li>04 73 00 &#8211; Seat Leon 3 (5F) Stylance</li>



<li>04 73 02 &#8211; Seat Leon 3 (5F) Kombi Cupra</li>



<li>04 73 03 &#8211; Seat Leon 3 (5F) Kombi</li>



<li>04 73 60 &#8211; Seat Leon 3 (5F) FR</li>



<li>04 73 80 &#8211; Seat Leon 3 (5F) facelift Hatchback</li>



<li>04 73 82 &#8211; Seat Leon 3 (5F) facelift Kombi</li>



<li>04 23 16 &#8211; Seat Tarraco Xcellence</li>



<li>04 52 01 &#8211; Seat Toledo</li>



<li>04 53 01 &#8211; Seat Toledo</li>



<li>04 12 06 &#8211; Seat Arona</li>
</ul>

<p class="wp-block-paragraph">Example for a Golf 7.5 Phase 2 (see photo):</p>

<p class="wp-block-paragraph">Byte 00: <strong>02</strong> / Byte 01: <strong>73</strong> / Byte 02: <strong>10</strong>  </p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="453" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/mib2car-1024x453.jpeg" alt="" class="wp-image-58127" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-1024x453.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-300x133.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-768x340.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-1536x680.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-2048x907.jpeg 2048w, https://www.vag-coding.net/wp-content/uploads/2026/10/mib2car-600x266.jpeg 600w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="58255" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-change-the-vehicle-image-in-mib2/">Arona (KJ) &#8211; Change the vehicle image in MIB2</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58255</post-id>	</item>
	</channel>
</rss>
