Purpose: to activate the speed regulator after retrofitting.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “01 – Motor”.

4 – Click on “Access – 11” then enter the code “11463”

L’article Ibiza (6L) – Cruise control activation (retrofit) est apparu en premier sur VAG Coding.

Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation. (Models after 2006)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The first two digits of the code (??xxxx) are used to modify the Instrument module options. To suppress the brake pad indicatorsubtract 01 from these digits.
Example initial coding (with plate light) : 07232
To remove the brake pad indicator simply recode as follows: 06232 (07 – 01 = 06)

To activate the brake pad indicator : +01

L’article Ibiza (6L) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). (Models after 2006)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The first two digits of the code (??xxxx) are used to modify the Instrument module options. To remove the ice-washer indicator, subtract 04 from these digits.
Example of initial coding (with washer indicator) : 07232
To remove the washer indicator, simply recode as follows: 03232 (07 – 04 = 03)

To activate the ice washer indicator: +04

L’article Ibiza (6L) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

Purpose : To change the language of the ODB. (Highline MFA)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04

Set the value according to the selected language

1 = German
2 = English
3 = French
4 = Italian
5 = Spanish
6 = Portuguese

L’article Ibiza (6L) – Change ODB language est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for Seat Ibiza (6L)
–> Buy your OBDeleven device with VAG Custom

Seat Ibiza 3 (6L) (2002-2008) / FR / Cupra / Seat Cordoba

• Oil change reset
• Automatic locking/unlocking
• Brake pad warning
• Change language
• Comfort flashing light
• Country setting for horn
• Front windshield heater activation time
• Headlamp washer
• Headlamp washer delay
• Heated front seats
• Heated mirrors
• Instrument cluster region
• Acoustic confirmation of locking/unlocking
• Mirror heating time
• Drop-shaped rear wiper
• Rear windshield heater
• Rear windshield heater activation time
• Seat belt warning
• Selective central locking
• Delayed wiping of tears
• Remote trunk lid release
• Visual confirmation
• Windshield washer fluid warning

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article List OBDeleven One-Click Apps IBIZA (6L) est apparu en premier sur VAG Coding.

Purpose : Allows you to modify the type of tone and duration of the horn sound, depending on the country.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 10

Select :

1 – RoW (Rest of the World)
2 – Germany
3 – Great Britain

L’article Ibiza (6L) – Horn adjustment est apparu en premier sur VAG Coding.

Purpose : to configure the keys to be used with the vehicle.

WARNING: This procedure does not configure keys with immobilizer.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 01 (“Remote Control Adaptation” in the drop-down list)

Enter the number of keys to be adapted. Save.
Now press button 1 or 2 on each remote control to be adapted for at least 1 second. (A horn beep will confirm the procedure).
All keys must be adapted in a single procedure.
Configuration of all keys should not exceed 15 sec.

L’article Ibiza (6L) – Key configuration est apparu en premier sur VAG Coding.

Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The first two digits of the code (??xxxx) are used to modify the Instrument module options. To suppress the belt alarm, subtract 2 from these digits.

In the above example, the initial coding (with belt alarm) is: 07232

To delete the belt alarm, simply recode as follows: 05232 (07 – 02 = 05)

L’article Ibiza (6L) – Delete belt alarm est apparu en premier sur VAG Coding.

Purpose : To configure automatic door locking at speeds over 15 km/h.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 03 (“Auto-Lock” in drop-down list)

Set value 1

L’article Ibiza (6L) – Automatic door locking est apparu en premier sur VAG Coding.

Purpose : to configure automatic door unlocking when the ignition key is removed.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Comfort Module”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04 (“Auto-Unlock” in drop-down list)

Set value 1

L’article Ibiza (6L) – Automatic door unlocking est apparu en premier sur VAG Coding.