Purpose: Allows you to disable the SafeLock feature, displaying the warning message “Check SAFELOCK! Owner’s manual!” on the ODB after the ignition is turned off. The vehicle can be unlocked from the inside even after it has been locked from the outside.

Safelock is an anti-theft system that prevents thieves from gaining access to the car. This device locks the doors—both from the outside and the inside—when the driver activates the central locking remote control after leaving the vehicle.
If occupants are still inside, they cannot open the doors or even lower the windows. The car can then become a veritable trap.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347 “.

5 – Click on“Adaptation – 10 “.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ ZV allgemein – ZV_ohne_Safe_Funktion”

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“installed” and confirm.

L’article Q2 (GA) – Disable the SAFELOCK feature est apparu en premier sur VAG Coding.

Purpose: Starts Coming Home when the driver’s door is opened, not when the ignition key is removed.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Comfort illumination-Coming Home Einschaltereignis“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Driver door” and confirm.

L’article Q2 (GA) – Coming Home on opening the driver’s door est apparu en premier sur VAG Coding.

Purpose: deactivates interior lighting when only the trunk is opened.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347 “.

5 – Click on“Adaptation – 10 “.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Interior lighting Innenlicht-bei offenem Heckdeckel einschalten“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“inactive” and confirm.

L’article Q2 (GA) – Interior lighting off when trunk is opened est apparu en premier sur VAG Coding.

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation. (For Phase 1)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 4

Disable bit 7 ” Brake Pad Wear Sensor installed “

Restart the vehicle so that the warning light is no longer displayed.

L’article Q2 (GA) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic).
Warning: if you have the driving mode selection, do not modify!

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance“.

4 – Click on“Security Access – 16” then enter the code“19249“.

5 – Click on“Adaptation – 10“.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Courbes caractéristiques d’assistance de direction” /“Characteristic curve of steering assistance“

7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On this, choose the value:“Confort” or “Dynamic” then validate.

selection_by_charisma: You have the driving modes, do not modify this value otherwise you will lose the hardness of the steering wheel according to your driving mode!

L’article Q2 (GA) – Modify power steering hardness est apparu en premier sur VAG Coding.

Purpose: Enables automatic folding of mirrors when the ignition is switched on, rather than when the vehicle is locked.


The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)” option, and the coded option in the tuto must automatically fold the mirrors.
Caution: Does not work properly with vehicle equipped with KESSY option.



Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Mirror adjustment /spiegelverstellung-Signalisierung_Spiegelanklappung“.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“inactive” and confirm.

L’article Q2 (GA) – Fold down mirrors with ignition on est apparu en premier sur VAG Coding.

Purpose: Allows the sunroof to open fully when opening with the remote control.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access control 2-SAD Richtung Komfortoeffnen“.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Open” and confirm.

L’article Q2 (GA) – Complete opening of sunroof with remote control est apparu en premier sur VAG Coding.

Purpose: to activate closing and opening of windows and sunroof with the KESSY keyless entry system, keep pressing the handle until the windows are fully closed or open.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access control 2-Kessy Komfort oeffnen“.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access control 2-Kessy Komfort schliessen“.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.

L’article Q2 (GA) – Opening/closing windows with KESSY est apparu en premier sur VAG Coding.

Purpose: Activates the gearshift recommendation. The gearshift recommendation is then displayed in the lower section of the ODB.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments“.

4 – Click on“Coding – 07” then on“Long Coding Helper” .

5 – Select byte“1“
Then check Bit“5“.

L’article Q2 (GA) – Activate gearshift recommendation est apparu en premier sur VAG Coding.

Purpose: Allows you to choose the language of your on-board computer. For an A3 8V imported from abroad, for example.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments“.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Variante linguistique” /“Language Version“.

7 – Select language from second value list

L’article Q2 (GA) – Change ODB language est apparu en premier sur VAG Coding.