Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). (Model after 2000)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on“17 – Instruments” . 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Coding 07” .

5 – The first two digits of the code (??xxx) are used to modify the Instrument module options. To remove the ice-washer indicator, subtract 04 from these digits.

In the example above, the initial coding (with washer indicator) is: 07232

To remove the windscreen washer indicator, simply recode as follows: 03232 (07 – 04 = 05)

To activate the ice washer indicator: +04

L’article TT (8N) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Audi TT (8N)
–> Buy your OBDeleven with VAG Custom

Audi TT 8N MK1 (1998-2006) Coupé / Roadster / Quattro

• Oil service reset

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps TT (8N) list est apparu en premier sur VAG Coding.

Purpose: activates confirmation of vehicle locking/unlocking with turn signals.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”. 35 – Central lock ” .

4 – Click on “Coding – 07”.

Add +512 (for flasher on lock) and/or +4096 (for flasher on unlock) to base value

L’article TT (8N) – Door lock/unlock confirmation (turn signals) est apparu en premier sur VAG Coding.

Purpose: to add an external temperature display to the on-board computer. (After 2002)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Adaptation – 10”.

5 – Add +1 to the penultimate digit(xxx?x)

L’article TT (8N) – Outdoor temperature display on ODB est apparu en premier sur VAG Coding.

Purpose: Enables the gauge faces and meter needles to be illuminated as soon as the ignition is switched on. (After 2002)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Adaptation – 10”.

5 – Add +1 (for gauges) and/or +2 (for needles) (so +3 for both) for the first digit (?xxxx)

L’article TT (8N) – Activate counter backlight on contact est apparu en premier sur VAG Coding.

Purpose: to activate the speed governor after retrofitting.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “01 – Motor”.

4 – Click on “Access – 11” then enter the code “11463”

L’article TT (8N) – Cruise control activation (retrofit) est apparu en premier sur VAG Coding.

Purpose: to change the language of messages on the driver information system display.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Adaptation – 10” then click on“Channel 04”.

5 – Modify value: langCode

00001 – German
00002 – English
00003 – French
00004 – Italian
00005 – Spanish
00006 – Portuguese

L’article TT (8N) – Change ODB language est apparu en premier sur VAG Coding.

Purpose: Displays the Climatronic Hidden Menu.

Displaying instantaneous digital speed? it’s possible! No need to use your VCDS VAG-COM cable for this tutorial.

What’s it for?

In the hidden Audi Climatronic menu, you can easily access secret diagnostic readings such as battery voltage, car speed, engine rpm, sensor readings, system DTC codes and much more.

Audi Climatronic single-zone hidden menu procedure

To display some of the car’s operating parameters on the air-conditioning display:

1. Simultaneously press the air recirculation button and the upward ventilation button.
2. The display shows “1C” (channel 1 is the default).
3. Use the temperature change knob to select the desired function. Press “+” to access the upper channel and “-” to access the lower channel.
4. For example, for real-time engine oil temperature, you need to display channel 51 (51C on the screen).
5. Confirm the function by pressing the air recirculation button.
6. The selected channel’s information is then displayed on the climate control screen.

List of hidden menu channels

L’article TT (8N) – Show hidden menu Climatronic est apparu en premier sur VAG Coding.

Purpose: to activate closing and opening of windows and sunroof with remote control.

Press and hold the buttons on the remote control or use the locking cylinder to open and close the windows and sunroof.


Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

Line 1:

2 – Switch on the ignition and run the VCDS program.

3 – Click on ” Select” then click on “35 – Verr. centralise .

4 – Click on “Coding – 07“.

Add +64 to base value

L’article TT (8N) – Opening/closing windows with remote control est apparu en premier sur VAG Coding.

Purpose: To set confirmation of door locking/unlocking with beep (horn).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”. 35 – Central lock ” .

4 – Click on “Coding – 07”.

Add +1024 to base value

L’article TT (8N) – Door lock/unlock confirmation (Horn) est apparu en premier sur VAG Coding.