Purpose: to suppress navigation and telephone warning messages on the MMI when entering data while driving.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select “, then click on ” Select “. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.5F – Information Electr.” .

4 – Click on ” Adaptation – 10“.

5 – Select Channel 2 and 3 then set the value to 250.

L’article Q7 (4L) – Disable NAV & Phone warning messages when entering while driving est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Audi Q7 (4L)
–> Buy your OBDeleven device with VAG Custom

Audi Q7 4L (2005-2015) / Q7 4L Facelift (specific facelift coding at bottom of page)

• DVD lock MMI 2G
• Glove compartment lock
• Green Engineering 2G menu
• Unlocking the heater
• MMI 3G/3GP Video on the move
• Oil change reset
• Optical PDC illustration
• Service interval
• Tourism solution for lighthouses
• Engine oil type

Audi Q7 4L Facelift (2009-2015)

• MMI 3G DVD lock
• 3G/3G+ technical menu
• Gauge test – Needle sweep
• Glove compartment lock
• Unlocking the heater
• Inspection service reset
• Stopwatch
• MMI 3G/3GP Radio frequency
• MMI 3G/3GP Video on the move
• Oil service reset
• Optical PDC illustration
• Service interval
• Summer menu in MMI
• Comfort windows
• Motor 1 fan test
• Motor 2 fan test
• Fuel system priming
• Mirror scan
• Tourism solution for lighthouses
• Engine oil type

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps Q7 (4L) list est apparu en premier sur VAG Coding.

Purpose: to change the Splash Screen of the MMI 2G.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

The hidden menu must be activated (see: Activating the MMI 2G hidden menu ).

Launch the Hidden Menu by pressing SETUP + CAR (for 6s)

DIAG SETTINGS -> HU Codierung -> Standby-Bild -> choose value

Coding :

0: Standard MMI 2G screen
1: S6
2: S5
3: RS6
4: RS logo

Restart the MMI by pressing SETUP + Wheel + Top Right Button.

L’article Q7 (4L) – Change start logo MMI 2G est apparu en premier sur VAG Coding.

Purpose: To modify and/or customize the home screen logo (Custom Splash Screen) with a personalized image of the MMI 3G and 3GPLUS.

Start by downloading the script file: MMI_3G_3GP_SplashScreen_VAG-Coding.en.zip

Proceed :

• Then extract the file you just downloaded: MMI 3G 3GP SplashScreen VAG-Coding.en.zip
• Go to the “splashscreens” folder and edit the “startup_generic.png” image if you wish. You can edit this image, modify it or import another image, to have your own startup logo (keep the same PNG format and image size 800×480) or an image found in the “samples” folder (copy it into the “splashscreens” folder with the name startup_generic.png.
• Copy the contents of the MMI_3G_3GP_SplashScreen folder to a FAT32-formatted SD card (max. 32GB).
• Start your AUDI and let the MMI boot up, it takes a few seconds.
• Disconnect your smartphone’s Bluetooth if there’s a link between it and the MMI, and remove all your SD cards (SD1 & SD2)…
• Then insert the SD card you have prepared into slot SD1.
• You’ll see green text asking you to turn the large knob on your MMI central console, and the message will disappear.
• Wait a few moments. A new message will appear stating that all has gone well and that your image has been imported successfully.
• Restart the MMI using the button combination that corresponds to your AUDI.
  Example: Press SETUP or MENU (1) + Central knob (2) + Top right button (3) at the same time.

If your new start-up screen does not appear when your MMI reboots, go to the green hidden menu (to activate the hidden menu, follow the “Activate MMI 3G or 3GP hidden menu” tutorial).

For MMI 3GP : Select in car -> carcodingvehicle -> Select n° screen -> set cursor to 0, then restart your MMI.

For MMI 3G: car -> carcodingvehicle -> configuration line -> [standard] 2/5 (Standard home screen) then restart your MMI.

Your very own Splash Screen will appear!
Many images are available in the zip file… both the original and modified ones.

A problem? If the script doesn’t run the first time, try again. You’ve only copied the contents of the MMI_3G_3GP_SplashScreen folder? Do not copy the folder, just its contents!
For MMI 3G Basic: If your image does not appear or is truncated, resize the image to 400 by 240.

L’article Q7 (4L) – MMI 3G/3GP customized start logo est apparu en premier sur VAG Coding.

Purpose: to correct the fuel consumption display on the on-board computer.

Modification only possible on Mid/High range models.
Note: modifications affect the display of instantaneous consumption, average consumption and fuel quantity.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Adaptation- 10”.

5 – Select Channel 03 “Consumption Correction”.

Adjust consumption correction factor between 85% and 115%. (base value: 100)

Example 1: Calculation based on volume per distance (e.g. l/100 km): DIS: 9.3 l/100 km. Actual: 9.8 l/100 km. (100, 9,8 / 9,73 ? 105,38) Channel 3 will be changed from 100 to 105
Example 2: Calculation based on volume distance (e.g. MPG is: DIS: 23 MPG. Actual: 24 MPG. (100, 23/24 and 95.83) Channel 3 will be changed from 100 to 96

L’article Q7 (4L) – Correction of ODB consumption display est apparu en premier sur VAG Coding.

Purpose: activates ambient lighting and its management via MMI.

The hidden menu must be activated (See: Activate hidden menu MMI 3GP )

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1: Activate mood lighting

3 – Click on ” Select”, then click on “Select”. 09 – Cent. Elect.” .

4 – Click on “Coding – 07” then click on “Long Coding Helper”.

5 – Select Byte 16:
Bit 6: Tick “Interior/Ambiance Lighting Adaptation active”.

Line 2: Activate the MMI menu

Launch the Hidden Menu by pressing MENU + CAR (for 6s)

car -> carmenuoperation -> interior light -> select “5”.

Press “Return

car -> cardevicelist -> interior light -> check box

car -> carbusassignment -> Interior light -> Select [CAN Komfort] 1/9

Reboot the MMI by pressing MENU + Wheel + Top Right Button.

Line 3: Ambient lighting control from MMI

How it works:

Ambient lighting
– is permanently activated when the light control switch is in OFF position.
– switches on/off automatically when the headlamp switch is in AUTO position.
– will never light up to 100% (even when maximum lighting is selected).
– lights up to 100% when doors are opened.

L’article Q7 (4L) Facelift – Activating ambient lighting est apparu en premier sur VAG Coding.

Purpose: activates ambient lighting and its management via MMI.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1: Activate mood lighting

3 – Click on ” Select”, then click on “Select”.09 – Cent. Elect.” .

4 – Click on “Coding – 07” then click on “Long Coding Helper”.

5 – Select Byte 16:
Bit 6: Tick “Interior/Ambiance Lighting Adaptation active”.

Line 2: Activate the MMI menu

For Radio Symphony/Concert

[56 – Radio] -> [Coding- 07] -> [Long Coding Helper].

Byte 8 :
Bit 7: “Interior Light Settings active” checkbox

For MMI Basic Plus

[07 – Control Head] -> [Coding – 07]

Add “2” to the penultimate digit of the coding (old coding: 0164201, new coding: 0164221).

For MMI 2G

[07 – Control Head] -> [Adaptation – 10] -> Channel 01

Add “2” to the existing value

For MMI 3G

The hidden menu must be activated (see: Activating the MMI 3G hidden menu ).

car -> carmenuoperation -> interior light -> select “5”.

Press “Return

car -> cardevicelist -> interior light -> check box

Reboot the MMI by pressing SETUP + Wheel + Top Right Button.

Line 3: Ambient lighting control from MMI

For MMI 3G

How it works:

Ambient lighting
– is permanently activated when the light control switch is in OFF position.
– switches on/off automatically when the headlamp switch is in AUTO position.
– will never light up to 100% (even when maximum lighting is selected).
– lights up to 100% when doors are opened.

L’article Q7 (4L) – Activate mood lighting est apparu en premier sur VAG Coding.

Purpose: to activate/deactivate the daytime running lights (DRL) on the MMI.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect.” .

4 – Click on “Coding – 07” then “Long Coding Helper”

5 – Put 2 in the penultimate digit of the code (0xxxx?x).

-> 2 = with Daytime Running Lights (selectable via MMI)

L’article Q7 (4L) – Activate daytime running lights (DRL) on MMI est apparu en premier sur VAG Coding.

Purpose: Activates CD/DVD extraction in the DVD player. Allows you to import / copy all CD/DVD / SD card content to the MMI 3G PLUS jukebox (hard disk).

To continue, you must first activate the hidden MMI menu (Green Menu).

To activate the MMI hidden menu (Green Menu) : Activate MMI 3GP hidden menu

Press CAR + SETUP for 6 sec to bring up the hidden menu.

diagnose -> settings -> import_multimedia -> Tick Ripping

Restart MMI

Press MENU + Wheel + Top Right button.

L’article Q7 (4L) Facelift – Activate MMI 3GP CD/DVD extraction est apparu en premier sur VAG Coding.

Purpose: Activates CD/DVD extraction in the DVD player. Allows you to import / copy all CD/DVD / SD card content to the MMI 3G jukebox (hard disk).

To continue, you must first activate the hidden MMI menu (Green Menu).

To activate the MMI hidden menu (Green Menu) : Activate MMI 3G Hidden Menu

Press CAR + SETUP for 6 sec to bring up the hidden menu.

diagnose -> settings -> import multimedia -> selectionner [Copy/Ripping] 4/4

Restart MMI

Simultaneously press SETUP or MENU (1) + Central knob (2) + Top right knob (3)

L’article Q7 (4L) – Activate MMI 3G CD/DVD extraction est apparu en premier sur VAG Coding.