OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Audi E-Tron (GE)
–> Buy your OBDeleven device with VAG Custom

Audi e-tron GE (4KE) (2019+ ) Quattro

• ACC driving program
• Acceleration display
• Radio AM
• Automatic PDC activation
• Brake pad wear sensor
• Brake pad replacement
• Wireless CarPlay
• Central locking with IGN
• Comfort flashing light
• Copy music from a CD
• DRL parameters in multimedia
• DRL with EPB
• Easy entry
• Engineering menu
• Folding mirrors mode
• Headlamp washer
• Inspection service reset
• JP taillight animation
• Keyless entry deactivation
• Lap timer
• Acoustic confirmation of locking/unlocking
• Multicolored presentation
• Multimedia start-up screen
• Needle sweep
• Parking light
• Scandinavian DRL
• Seat belt warning
• Seat heater 1
• Seat heater 2
• Seat heater 3
• Seat ventilation 1
• Seat ventilation 2
• Seat ventilation 3
• Second phone
• Showroom mode
• Side marker lights
• Speed warning
• Steering wheel heater
• Travel mode menu
• Unlocking after P
• MIB 2 motion video
• Moving video MIB3 OFF
• Motion video MIB3 ON
• Washer fluid sensor
• Radio AM MIB3
• Auto-dimming side mirrors
• Automatic unlocking
• Type of CH light activation
• Comfort windows
• Motor 1 fan test
• Motor 2 fan test
• FM radio settings
• Left front door lock test
• Right front door lock test
• Fuel door lock
• Headlamp washer test
• Hill-start assist settings
• Inspection service distance
• Inspection service interval
• Interior lighting scenario
• Vibration parameters for track-assist wheels
• Start lights
• MMI welcome sound
• Multimedia restart
• Multimedia security notice
• Electrically folding mirrors
• Left rear door lock test
• Right rear door lock test
• Selective central locking
• Automatic window lowering

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps E-TRON (GE) list est apparu en premier sur VAG Coding.

Purpose: Allows you to fine-tune seat ventilation, you can increase or decrease all respective seat ventilation levels by up to 10% compared to factory delivery to obtain the optimum amount of ventilation for you.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 (Front seats):

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Fine adjustment of seat ventilation level 1” / “Sitzlüftung Feineinstellung Stufe 1”.

Then levels 2 and 3 (Power of ventilated seats)

6 – On this same page, there is a second drop-down menu, but towards the bottom of the page.
On this, choose the range of values: -10 to +10 (% – per cent) in relation to the basic ventilation speed, then validate.

Line 2 (Rear seats):

3 – Click on“Select” then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Fine adjustment of rear seat ventilation level 1” / “Sitzlüftung hinten Feineinstellung Stufe 1”.

Then levels 2 and 3 (Power of ventilated seats)

6 – On this same page there is a second drop-down menu, but towards the bottom of the page.
On this, choose the range of values: -10 to +10 (% – per cent) in relation to the base ventilation speed, then validate.

L’article E-tron (GE) – Ventilated seat settings est apparu en premier sur VAG Coding.

Purpose: Used to adjust the seat heating temperature, you can increase or decrease the heating level of all or part of the seat by up to 5 degrees Celsius to obtain the optimum temperature setting for you.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Fine adjustment of seat heating level 1” or “Sitzheizung Feineinstellung Stufe 1”.

Then levels 2 and 3 (Heated seat power)

6 – On this same page, there is a second drop-down menu at the bottom of the page.
Here, select the range of values: -5 to +5 (degrees Celsius) relative to the base temperature, then confirm.

L’article E-tron (GE) – Heated seat settings est apparu en premier sur VAG Coding.

Purpose: to add the stopwatch to the Virtual Cockpit.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper” .

5 – Select byte“1”
Then check Bit“3”:“Lap Timer active”.

Alternative method if the 1st doesn’t work!! :

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Lap counter”.

6 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Display” and confirm.

L’article E-tron (GE) – Lap Timer est apparu en premier sur VAG Coding.

Purpose: Adds the G-Meter (Accelerometer) to the Virtual Cockpit screen.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper” .

5 – Select byte“10”
Then check Bit“2”:“Display Acceleration”.

L’article E-tron (GE) – Activate G-Meter est apparu en premier sur VAG Coding.

Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL).



Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.


Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on “Coding – 07”.

5 – Select byte 2, check bit 3 “sl_at_drl”.

OBDELEVEN: “SL_AT_DRL” active

L’article E-tron (GE) – Rear lights activated with daytime running lights (DRL) est apparu en premier sur VAG Coding.

Purpose: to activate/deactivate the daytime running lights (DRL) from the MMI.

ATTENTION to your country’s regulations and technical inspection for daytime running lights!
However, if you’re coding in your car to avoid using too much of your battery, this is a good solution…

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding – 07”.

5 – Select byte 2, check bit 1 “drl_mmi”.

OBDELEVEN: “DRL_MMI” active

L’article E-tron (GE) – Daytime running lights (DRL) on/off via MMI est apparu en premier sur VAG Coding.

Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Select byte“1”
Then check Bit“0”:“Gauge Test/Needle Sweep (Stading) active” or “Staging”.

L’article E-tron (GE) – Needle check est apparu en premier sur VAG Coding.

Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select”, then click on“17 – Instruments”.

4 – Click on“Coding – 07” then“Long Coding Helper”.

5 – Select byte 0:
Bit 2-4: select “Seat Belt Warning inactive” from the drop-down list.

OR

4 – Click on“Adaptation – 10”.

5 – Click on“Security Access – 16” then enter the code“20103”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Deactivate Seat belt warning” / “ Désactiver l’avertissement de ceinture”.

7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, select“Oui” /“Yes” and confirm.

L’article E-tron (GE) – Delete belt alarm est apparu en premier sur VAG Coding.

Purpose: Automatically sets the display of activated parking assistance as a 360-degree panoramic view if the view camera system is installed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.

2 – Switch on the ignition and run the VCDS program. or OBDeleven.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on “ Adaptation – 10 ”.

5 – Select“Visual parking aid display” / “Optische Anzeige für Einparkhilfe” channel

Set value to “OPS+360”.

Restart the MMI: long press NAV/MAP + rotary pushbutton + RADIO

L’article E-tron (GE) – Activate 360-degree park assist display camera est apparu en premier sur VAG Coding.