OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Audi A8 (D3)
–> Buy your OBDeleven device with VAG Custom

Audi A8 D3 (4E) (2002-2010) / Audi S8

• Brake pad replacement
• Brake pad thickness
• DVD lock MMI 2G
• Green Engineering 2G menu
• Unlocking the heater
• Stopwatch
• Oil service reset
• Service interval
• Tourism solution for lighthouses
• Engine oil type

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps A8 (D3) list est apparu en premier sur VAG Coding.

Purpose: To modify and/or customize the home screen logo (Custom Splash Screen) with a personalized image of the MMI 3G and 3GPLUS.

Start by downloading the script file: MMI_3G_3GP_SplashScreen_VAG-Coding.en.zip

Proceed :

• Then extract the file you just downloaded: MMI 3G 3GP SplashScreen VAG-Coding.en.zip
• Go to the “splashscreens” folder and edit the “startup_generic.png” image if you wish. You can edit this image, modify it or import another image, to have your own startup logo (keep the same PNG format and image size 800×480) or an image found in the “samples” folder (copy it into the “splashscreens” folder with the name startup_generic.png.
• Copy the contents of the MMI_3G_3GP_SplashScreen folder to a FAT32-formatted SD card (max. 32GB).
• Start your AUDI and let the MMI boot up, it takes a few seconds.
• Disconnect your smartphone’s Bluetooth if there’s a link between it and the MMI, and remove all your SD cards (SD1 & SD2)…
• Then insert the SD card you have prepared into slot SD1.
• You’ll see green text asking you to turn the large knob on your MMI central console, and the message will disappear.
• Wait a few moments. A new message will appear stating that all has gone well and that your image has been imported successfully.
• Restart the MMI using the button combination that corresponds to your AUDI.
  Example: Press SETUP or MENU (1) + Central knob (2) + Top right button (3) at the same time.

If your new start-up screen does not appear when your MMI reboots, go to the green hidden menu (to activate the hidden menu, follow the “Activate MMI 3G or 3GP hidden menu” tutorial).

For MMI 3GP : Select in car -> carcodingvehicle -> Select n° screen -> set cursor to 0, then restart your MMI.

For MMI 3G: car -> carcodingvehicle -> configuration line -> [standard] 2/5 (Standard home screen) then restart your MMI.

Your very own Splash Screen will appear!
Many images are available in the zip file… both the original and modified ones.

A problem? If the script doesn’t run the first time, try again. You’ve only copied the contents of the MMI_3G_3GP_SplashScreen folder? Do not copy the folder, just its contents!
For MMI 3G Basic: If your image does not appear or is truncated, resize the image to 400 by 240.

L’article A8 (D3) – MMI 3G/3GP customized start logo est apparu en premier sur VAG Coding.

Purpose: to activate Bluetooth with an Audi MMI 3G.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

To continue, you must first activate the hidden MMI menu (Green Menu).

To activate the MMI hidden menu (Green Menu) : Activate MMI 3G Hidden Menu

Step 1: Activate Bluetooth in the hidden menu

Press CAR + SETUP for 6 sec to bring up the hidden menu.

main > diagnostics > settings > Tel settings misc

Select [no WLAN / no NAD / BT / HFP] 4 /16

Step 2: Restart MMI

Simultaneously press SETUP (1) + Central knob (2) + Top right knob (3)

Step 3: Bluetooth activation with VCDS

3 – Click on ” Select” and then click on ” “.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 17 then set the value to 1

L’article A8 (D3) – MMI 3G Bluetooth activation est apparu en premier sur VAG Coding.

Purpose: to activate the AUX (Auxiliary) socket on the rear of the MMI 2G 3G 3GPLUS, for retrofitting to CarPlay / Android Auto / MP3 / BT box / AUX cable. You’ll also see “AUX” as an option in the multimedia menu on the central screen once you’ve completed the activation process.

When installing a CarPlay and Android Auto box kit on your MMI, you may wish to enable the AUX pin on the head unit on some cars (normally cars equipped with the Audi AMI multimedia interface).
Note: if you have the Audi AMI interface, you can also use an AMI-AUX adapter instead of activating AUX. This will work fine, but you’ll need to run a cable to the AMI input. Although it works correctly, this cable is not hidden.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

For MMI 2G / 3G

To continue, you must first activate the hidden MMI menu (Green Menu).

To activate the hidden MMI menu (Green Menu) the tutorial is available according to your MMI model in the vehicle list.

Step 1: Activate AUX in the hidden menu

Press CAR + MENU for 6 sec to bring up the hidden menu.

MMI 2G : DIAG SETTINGS -> APK 0x01, -> Stereo Aux In (Check) -> accept changes (to validate the modification)

MMI 3G : diagnose -> settings -> ami_aux -> Select AUX [enabled] 1/2

Step 2: Restart MMI

Press MENU + Wheel + Top Right button.

For MMI 3G / 3GP

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Coding – 07” then click on“Long Coding Helper“.

6 – Select byte“8“
Check bit“4” AUX-IN [PR-UE3] to activate your MMI AUX output

Uncheck AMI bit“5”[PR-UE7] if you’re using a Carplay box without an AMI adapter and you have the original AMI plug.

L’article A8 (D3) – AUX-IN activation (retrofit) est apparu en premier sur VAG Coding.

Purpose: Allows you to remove the MMI protection and continue watching a DVD or video while driving (Video in Motion).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Step 1: Retrieving the MMI 2G/3G serial number

3 – Click on “Select”, then click on “Select”.5F-Computer-electr. “for MMI 3G or“07 – Display/Cmde” for MMI 2G

4 – Click on “Advanced Ident -1A”.

Retrieve serial number (if more than one, use the first one!)

Step 2: Calculating the security code

Enter the serial number previously retrieved from the website (your choice, subject to availability):

–> AUDIENTHUSIATS VIM

–> BESTCARMODS VIM

The site will display your security code.
An alternative security code is also generated.

Step 3: Enter security code

3 – Click on “Select”, then click on “Select”.5F-Computer-electr. “for MMI 3G or“07 – Display/Cmde” for MMI 2G

4 – Click on “Secure access -16”.

Enter security code
(Use alternative security code if first code does not work)

Step 4: Removing the protection

3 – Click on “Select”, then click on “Select”.5F-Computer-electr. “for MMI 3G or“07 – Display/Cmde” for MMI 2G

4 – Click on “Adaptation -10”.

5 – Select Channel 48 for MMI 3G or Channel 63 for MMI 2G

Set value to 255

Step 5: Restart the MMI

Simultaneously press MENU + Wheel + Top right button

L’article A8 (D3) – Activate DVD playback while driving (VIM) est apparu en premier sur VAG Coding.

Purpose: Activates battery charge status in Audi MMI Basic / 2G / 3G / 3GP.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

MMI Basic (Radio Symphony/Concert) :

3 – Click on ” Select”, then click on “Select”.56 – Radio” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 39 then increase the value by +16

MMI 2G :

3 – Click on ” Select”, then click on “Select”.07 – Control Head” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 01 then adjust the value accordingly:

x1xxxxxx = show battery status display
x0xxxxxx = do not show battery status display

6 – Select Channel 02 (Installation List II (MMI Functionnality) then increase the value by +32

Restart the MMI (Press SETUP + Wheel + Top Right Button)

If the battery does not appear after restarting the MMI, launch the hidden menu (to activate it, see the “activate hidden menu” tutorial, to launch the hidden menu press MENU + CAR (for 6s)).

DIAG SETTINGS -> Car Menus Maske -> Battery Level-> Check box

MMI 3G / 3GP :

WARNING: You must have activated the Hidden Menu(Activate MMI 3G hidden menu).

To launch the Hidden Menu press MENU + CAR (for 6s)

car -> carextdevicelist -> battery -> check box

car -> carmenuoperation -> battery -> select 5

Restart MMI

Press SETUP + Wheel + Top Right Button.

L’article A8 (D3) – Activate battery charge status in MMI est apparu en premier sur VAG Coding.

Purpose: to change the Splash Screen of the MMI 3G.

For a custom logo see tuto: A8 (D3) – MMI 3G/3GP custom start logo

Proceed :

To continue, you must first activate the hidden MMI menu (Green Menu).

To activate the MMI hidden menu (Green Menu) : Activate MMI 3G Hidden Menu

Step 1: Change the start logo in the hidden menu

Press CAR + SETUP for 6 sec to bring up the hidden menu.

car -> carcodingvehicle -> configuration line

Select the desired display:

[unknown] 1/5 (Standard home screen)
[standard] 2/5 (Standard welcome screen)
[S-line] 3/5 (Standard welcome screen)
[S-model] 4/5 (S welcome screen depending on model)
[RS-Model] 5/5 (RS welcome screen)

Then select “Update Splashscreen (according car line)”.

Step 2: Restart MMI

Simultaneously press SETUP or MENU (1) + Central knob (2) + Top right knob (3)

L’article A8 (D3) – Change MMI 3G start logo est apparu en premier sur VAG Coding.

Purpose: to change the Splash Screen of the MMI 2G.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

The hidden menu must be activated (see: Activating the MMI 2G hidden menu ).

Launch the Hidden Menu by pressing SETUP + CAR (for 6s)

DIAG SETTINGS -> HU Codierung -> Standby-Bild -> choose value

Coding :

0: Standard MMI 2G screen
1: S6
2: S5
3: RS6
4: RS logo

Restart the MMI by pressing SETUP + Wheel + Top Right Button.

L’article A8 (D3) – Change start logo MMI 2G est apparu en premier sur VAG Coding.

Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (EPB reset / Lining change mode)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.


To start, set the gear lever to P, remove the electric handbrake on the button and preferably connect a battery charger according to the vehicle manual. Check that there are no faults/errors before starting basic setup.

3 – Click on“Select” then click on“53 – Parking Brake”.

4 – Click on“Basic setting – 04”.

5 – Select Channel 007

6 – Click on“Go”.

Basic Settings: OFF during the procedure, then ON when finished (yellow arrow).

A fault message will appear on your ODB indicating“Parking brake fault” and an LED in the parking brake switch, but this is normal and should be ignored.

7 – Once finished, go back (Done, Go Back) until the program closes.

8 – Switch off the vehicle’s ignition, then disconnect the VAG-COM cable

9 – Change the linings on both sides!

To reactivate the electric handbrake :


10 – With engine off and ignition switched off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

11 – Switch on the ignition and run the VCDS program.

12 – Click on“Select” then click on“53 – Parking Brake”.

13 – Click on“Basic setting – 04”.

14 – Select Channel 006

15 – Click on“Go”.

Basic Settings: OFF during the procedure, then ON when finished (yellow arrow).

16 – Once finished, go back (Done, Go Back) until the program is closed.

17 – Switch off the ignition and disconnect the VAG-COM cable.

L’article A8 (D3) – Deactivate/activate electric handbrake for rear brake pad change est apparu en premier sur VAG Coding.

Purpose: to correct the fuel consumption display on the on-board computer.

Modification only possible on Mid/High range models.
Note: modifications affect the display of instantaneous consumption, average consumption and fuel quantity.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Adaptation- 10”.

5 – Select Channel 03 “Consumption Correction”.

Adjust consumption correction factor between 85% and 115%. (base value: 100)

Example 1: Calculation based on volume per distance (e.g. l/100 km): DIS: 9.3 l/100 km. Actual: 9.8 l/100 km. (100, 9,8 / 9,73 ? 105,38) Channel 3 will be changed from 100 to 105
Example 2: Calculation based on volume distance (e.g. MPG is: DIS: 23 MPG. Actual: 24 MPG. (100, 23/24 and 95.83) Channel 3 will be changed from 100 to 96

L’article A8 (D3) – Correction of ODB consumption display est apparu en premier sur VAG Coding.