OBDeleven OBD11 ONE-CLICK APPS coding and modification options for Audi A4 (B7)
–> Buy your OBDeleven device with VAG Custom

Audi A4 B7 (8E/8H) (2004-2008) / Audi S4 / RS4 / Allroad / Avant

• Change language
• Comfort flashing light
• Time to return home
• Freeway assistance lights
• Audible confirmation of locking/unlocking
• Oil change reset
• Rain lights
• Reverse wiping
• Speed limit RNS-E
• RNS-E start-up screen
• Teardrop wipe
• Tourism solution for lighthouses
• Engine oil type

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps A4 (B7) list est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS-E navigation screen.

ATTENTION: requires RNS-E version 193

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on “Select”, then click on“37 – Navigation”.

4– Click on“Adaptation – 10”.

5 – Select Channel 17 (Speed Display) then set the value according to the desired display.

Set the value according to the desired display
0– no option (display disabled)
1– option on, off (speed display)
2– option on, off, 5km/h, 10km/h, 15km/h, 20km/h (speed display + overrun warning)

Don’t forget to restart the RNS-E, by pressing the power button for more than 40s.

L’article A4 (B7) – Speed limit display RNS-E est apparu en premier sur VAG Coding.

Purpose: to correct the fuel consumption display on the on-board computer.

Modification only possible on Mid/High range models.
Note: modifications affect the display of instantaneous consumption, average consumption and fuel quantity.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Adaptation- 10”.

5 – Select Channel 03 “Consumption Correction”.

Adjust consumption correction factor between 85% and 115%. (base value: 100)

Example 1: Calculation based on volume per distance (e.g. l/100 km): DIS: 9.3 l/100 km. Actual: 9.8 l/100 km. (100, 9,8 / 9,73 ? 105,38) Channel 3 will be changed from 100 to 105
Example 2: Calculation based on volume distance (e.g. MPG is: DIS: 23 MPG. Actual: 24 MPG. (100, 23/24 and 95.83) Channel 3 will be changed from 100 to 96

L’article A4 (B7) – Correction of ODB consumption display est apparu en premier sur VAG Coding.

Purpose: to change the language of messages on the driver information system display. (MFA Midline and Highline)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“17 – instruments”.

4 – Click on“Adaptation – 10” then click on“Channel 04”.

5 – Modify value: langCode

00001 – German
00002 – English
00003 – French
00004 – Italian
00005 – Spanish
00006 – Portuguese
00008 – Chinese

L’article A4 (B7) – Change ODB language est apparu en premier sur VAG Coding.

Purpose: to set automatic door locking from 15km/h.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +32 to the existing coding :

L’article A4 (B7) – Automatic door locks est apparu en premier sur VAG Coding.

Purpose: activates selective locking/unlocking of doors.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +4 to the existing coding :

L’article A4 (B7) – Selective door locking/unlocking est apparu en premier sur VAG Coding.

Purpose: activates confirmation of vehicle locking/unlocking with turn signals.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +2 to the existing coding :

L’article A4 (B7) – Door lock/unlock confirmation (turn signals) est apparu en premier sur VAG Coding.

Purpose: Enables vehicle lock/unlock confirmation with beeps.

the vehicle must be equipped with the original alarm.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +1024 to the existing coding :

L’article A4 (B7) – Door lock/unlock confirmation (beep) est apparu en premier sur VAG Coding.

Purpose: Activates comfort closing confirmation. The indicators will light up (x1) when the windows and sunroof are fully closed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +512 to the existing coding :

L’article A4 (B7) – Comfort closing confirmation est apparu en premier sur VAG Coding.

Purpose: to adjust the intensity of the hands-free system’s microphone.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“77 – Telephone”.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose Channel 131.

7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose a value expressed in“dB” (default value“0 dB”) then validate.

L’article A4 (B7) – Microphone sensitivity adjustment est apparu en premier sur VAG Coding.