Purpose: to activate the speed governor after retrofitting.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “01 – Motor”.

4 – Click on “Access – 11” then enter the code “11463”

L’article A4 (B5) – Cruise control activation (retrofit) est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for Audi A4 (B5)
–> Buy your OBDeleven device with VAG Custom

Audi A4 B5 (8D) (1994-2000) Audi S4 / RS4 / Avant (Audi A8 D2 compatible coding)

• Oil service reset
• Oil service reset OLD

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps A4 (B5) list est apparu en premier sur VAG Coding.

Purpose: Displays the Climatronic Hidden Menu.

Displaying instantaneous digital speed? it’s possible! No need to use your VCDS VAG-COM cable for this tutorial.

What’s it for?

In the hidden Audi Climatronic menu, you can easily access secret diagnostic readings such as battery voltage, car speed, engine rpm, sensor readings, system DTC codes and much more.

Audi Climatronic single-zone hidden menu procedure

1. Turn position button II and wait for the Audi Climatronic system to start.
2. Press both the air recirculation and windshield defrost buttons.
3. On the screen, you should see 1C.
4. Select the channel using the temperature buttons.
5. Press the air recirculation button to read the value of the selected channel.
6. Press one of the temperature buttons to return to selection.
7. Turn the key to 0 position to exit the hidden menu.

List of hidden menu channels

• 1 – CTD
• 2 – Indoor temperature sensor value, head (G 86)
• 3 – In-dash temperature sensor value (G 56)
• 4 – fresh air intake temperature sensor value (G 89)
• 5 – value of outside air temperature sensor (G 17), front
• 6 – outdoor air temperature sensor value
• 7 – Fresh air blower temperature sensor value (G 109)
• 8 – Potentiometer value for temperature-controlled flap motor (G 92)
• 9 – temperature control authority flap value
• 10 – specified value of temperature control ruse
• 11 – central potentiometer value for flap motor (G 112)
• 12 – specified value of center flap
• 13 – Potentiometer value for low-cost/arrow motor (G 114)
• 14 – specified value of Footwell/Defroster Flap
• 15 – Potentiometer value for air motor (G 113)
• 16 – specified airflow damper value
• 17 – speed (km/h)
• 18 – Air blower voltage (volts)
• 19 – specified fresh air blower voltage (volts)
• 20 – A/C compressor voltage (volts)
• 21 – Low-voltage event counter
• 22 – A/C high-pressure switch cycle status (F 118)
• 23 – A/C high-pressure switch cycles (F 118)
• 24 – switch cycles, no absolute fluctuation
• 25 – kick-Down Switch
• 26 – Cooler temperature warning light (ECT)
• 27 – Motor speed (RPM)
• 29 – A/C compressor speed (RPM)
• 30 – SW version
• 32 – Malfunction counter, temperature control flap
• 33 – Malfunction counter, central flap
• 34 – Malfunction counter, Footwell/Defroster Flap
• 35 – malfunction counter, airflow map
• 36 – cold stop, temperature regulator (G 92)
• 37 – hot stop, temperature regulator, temperature flap motor (G 92), maximum stop
• 38 – cold stop, motorized flap-type power unit (G 112)
• 39 – Hot stop, central potentiometer for flap motor (G 112)
• 40 – cold stop, Footwell motor/flap over potentiometer (G114)
• 41 – hot stop, foot/arrow flap motor potentiometer (G114)
• 42 – cold stop, air level Engine map (G 113)
• 43 – hot shutdown, air plane for air flow map motor (G 113)
• 44 – Vehicle operating cycle counter
• 45 – calculated indoor temperature
• 46 – outside temperature, filtered, for control
• 47 – outdoor temperature in degrees C
• 48 – outdoor temperature
• 49 – operating countermeasure for speed signal
• 50 – rest time (in minutes)
• 51 – motor Cooler Temperature
• 52 – Graphic channel 1 – A/C compressor stop conditions are identified by illuminated segments of the “88.8” display.
• 53 – Graphic channel 2 – The electrical outputs of the climate system are identified by illuminated segments of the “88.8” display.
• 54 – Control features
• 55 – outdoor temperature for SIF/DIS
• 56 – temperature in degrees C, from indoor temperature sensor, in hairdresser (G 86)
• 57 – temperature in degrees C, from interior temperature sensor in instrument panel (G 56)
• 58 – temperature in degrees C, from fresh air intake pipe temperature sensor (G 89)
• 59 – temperature in degrees C, from outside air (ambient) Temperature sensor (G 17), front
• 60 – temperature in degrees C, from room temperature sensor at fresh air blower (G 109)
• 61 – software version
• 86 – Control display

L’article A4 (B5) – Show Climatronic hidden menu est apparu en premier sur VAG Coding.

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). (Model after 2000)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on“17 – Instruments” . 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Coding 07” .

5 – The first two digits of the code (??xxx) are used to modify the Instrument module options. To remove the ice-washer indicator, subtract 04 from these digits.

In the example above, the initial coding (with washer indicator) is: 07232

To remove the windscreen washer indicator, simply recode as follows: 03232 (07 – 04 = 05)

To activate the ice washer indicator: +04

L’article A4 (B5) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

Purpose: Allows you to set automatic door locking from 15km/h, and unlocking when the key is removed.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”. 35 – Central lock ” .

4 – Click on “Coding – 07”.

Add +32 to the base value

L’article A4 (B5) – Automatic door locks est apparu en premier sur VAG Coding.

Purpose : To change the language of the ODB.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04

Set the value according to the selected language

1 = German
2 = English
3 = French
4 = Italian
5 = Spanish
6 = Portuguese

L’article A4 (B5) – Change ODB language est apparu en premier sur VAG Coding.

Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The first two digits of the code (??xxxx) are used to modify the Instrument module options. To suppress the belt alarm, subtract 2 from these digits.

In the above example, the initial coding (with belt alarm) is: 07232

To delete the belt alarm, simply recode as follows: 05232 (07 – 02 = 05)

L’article A4 (B5) – Delete belt alarm est apparu en premier sur VAG Coding.