Purpose: Allows the rear fog lamps to be used when reversing, giving more light and safety when maneuvering in the dark.

Modification only possible for vehicles with a 30-byte module.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

6 – Byte 26:
Check Bit 6

L’article A3 (8P) – Activate fog lights when reversing est apparu en premier sur VAG Coding.

Purpose: to activate the gear display on the on-board computer (for manual gearboxes).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on ” 10 – Adaptation

5 – Select Channel 36 “Special Functions”
Add +1 to the existing value as specified in the tooltip (?xx).

Example: original value 000: change to 100

So excluding S/RS, the only possible value is: 100

L’article A3 (8P) Facelift – Gear display on ODB est apparu en premier sur VAG Coding.

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on “Coding 07”.

5 – The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To remove the ice-washer indicator, subtract 1 from these digits.

In the example above, the initial coding (with washer indicator) is: 0023103

To delete the windscreen washer indicator, simply recode as follows: 0022103 (23 – 01 = 22)

L’article A3 (8P) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer, for A3 8P phase 1 only).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on “Coding 07”.

5 – The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To remove the ice-washer indicator, subtract 4 from these digits.

In the example above, the initial coding (with washer indicator) is: 0025103

To remove the windscreen washer indicator, simply recode as follows: 0021103 (25 – 04 = 21)

L’article A3 (8P) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Audi A3 (8P)
–> Buy your OBDeleven device with VAG Custom

Audi A3 8P (2003-2012) / Audi S3 / RS3 (facelift) / A3 8P Facelift (specific facelift coding at bottom of page)

• Instrument cluster area
• Oil service reset
• RNS-E start-up screen
• Activate daytime running lights
• Automatic locking/unlocking
• Activate AUX input
• CD/DVD eject lock
• CH/LH lights
• Change language
• Comfort operation for sliding roofs
• Daytime running lights
• DRL with fog lights
• Emergency brake lights
• Floor lighting
• Headlamp washer
• Heated mirrors
• Inspection service reset
• Acoustic and visual confirmation of locking/unlocking
• Optical parking system
• Seat belt warning
• Synchronized mirror adjustment
• Tourism solution for lighthouses
• Engine oil type

Audi A3 8P Facelift (2008-2012)

• ESC V2 deactivation
• High beam assistant by region (LHD/RHD)
• High beam assistant city recognition
• High beam speed threshold
• Inspection service reset
• Low beam speed threshold
• Oil change reset
• RNS-E start-up screen
• DRL low beam
• Automatic locking/unlocking
• Automatic reverse wiping
• Activate AUX input
• CD/DVD eject lock
• Central locking with IGN
• CH/LH lights
• Change language
• Comfort function for sunroof
• Comfort flashing light
• Take-home mode
• Time to return home
• Bending lights
• Bending lights with reverse
• DRL activation/deactivation
• Attenuation DRL
• DRL parameters in the dashboard
• DRL with ADL
• DRL with fog lights
• Emergency brake lights
• Fog lamps with high beam
• Floor lighting while driving
• Headlamp washer
• Heated mirrors
• V2 inspection service reset
• Instrument cluster region
• Departure time
• LED license plate lamps
• Horn lock/unlock confirmation
• Optical parking system
• Rear window wiper
• Rear window wiper
• Remote window function
• Seat belt warning
• Selective central locking
• Synchronized mirror adjustment
• Drop-shaped windshield wiper
• Windshield wiper control
• Engine oil type
• Multimedia security notice
• Disabling the Start/Stop system

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps A3 list (8P) est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS-E navigation screen.

ATTENTION: requires RNS-E version 193

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on “Select”, then click on“37 – Navigation”.

4– Click on“Adaptation – 10”.

5 – Select Channel 17 (Speed Display) then set the value according to the desired display.

Set the value according to the desired display
0– no option (display disabled)
1– option on, off (speed display)
2– option on, off, 5km/h, 10km/h, 15km/h, 20km/h (speed display + overrun warning)

Don’t forget to restart the RNS-E, by pressing the power button for more than 40s.

L’article A3 (8P) Facelift – Speed limit display RNS-E est apparu en premier sur VAG Coding.

Purpose: to activate ambient foot lighting while driving. The footwell lights in the MFA appear in the Light & Visibility menu, where brightness can also be adjusted. (from 2006)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect.” .

4 – Click on“Coding – 07” then click on “Long Coding Helper”.

5 – Choose Byte 12
Check Bit 5

L’article A3 (8P) – Activate mood lighting est apparu en premier sur VAG Coding.

Purpose: to activate the comfort closing function of the Open Sky panoramic sunroof. When the vehicle is locked/closed, the Open Sky roof closes automatically.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Central Conv”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on “Coding 07” then “Long Coding Helper”

5 – Byte 04: Check Bit 5 (eFH comfort shutdown via FFB active)

Byte 05: Check Bit 5 (SAD comfort closure via FFB active)

L’article A3 (8P) – “Open Sky” comfort roof closure est apparu en premier sur VAG Coding.

Purpose : Activates synchronous adjustment of exterior mirrors. When the mirror setting is changed, the second mirror is moved synchronously.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding – 07” then on “Long Coding Helper”.

Byte 09: Check Bit 6

L’article A3 (8P) – Synchronized mirror adjustment est apparu en premier sur VAG Coding.

Purpose: Enables vehicle lock/unlock confirmation with beeps (alarm) and adds beep selection menu to ODB (MFA).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

6 – Select Byte 5:

Bit 1: Check “Locking Confirmation via Horn active”
Bit 4: Check “Unlocking Confirmation via Horn active”.

To add the beep selection menu to the ODB (MFA) :

Bit 2: Disable “Horn Confirmation Adaptation Blocked (Adaptation Channel 010/011 & MFA+/FIS)”

L’article A3 (8P) Facelift – Door lock/unlock confirmation (beep) est apparu en premier sur VAG Coding.